Abstract:Current research in hypersonic wind tunnel aerodynamic testing predominantly focuses on small-scale and lightweight models, typically limited to scales of 4 m and weights under 1 ton. However, there's an emerging trend in the design of hypersonic vehicles towards larger scales and heavier loads, often surpassing 9 m in length and several tons in weight. This shift poses new challenges as there's a noticeable gap in research specifically addressing the aerodynamic testing needs of these larger-scale models. Firstly, this study aims to fill this gap by conducting an exhaustive analysis of the impact of the strain box-balance floating frame on aerodynamic force transmission characteristics. This analysis is crucial as it offers essential theoretical guidance for designing large-scale strain box-balances in pulse combustion wind tunnels. These designs are uniquely tailored to test large and heavy air-breathing hypersonic vehicles (AHVs), addressing a critical need in the field. Subsequently, this study developed an innovative large-scale strain box-balance, measuring 2.4 m, specifically devised for aerodynamically testing extensive AHVs. Finally, to validate the effectiveness of this new strain box-balance design, the study undertook a series of comprehensive tests. These included static calibration tests, floating frame stiffness tests, and wind tunnel tests. The results from these experiments were remarkable, demonstrating high sensitivity across each test channel of the box-balance. Specifically, the sensitivities were 1.308 kg/10μv in the drag force test channel, 1.464 kg/10μv in the lift force test channel, and 1.104 kg/10μv in the pitching moment test channel. Additionally, the hysteresis levels recorded were exceptionally low, at 0.489 %, 0.0649 %, and 0.0086 % respectively for each channel. These findings not only validate the technical efficacy of the large-scale strain box-balance but also mark a significant stride in hypersonic aerodynamic research, catering to the emergent requirements of larger, heavier hypersonic vehicle models.

Design of a milli-newton force balance for hypersonic rarefied wind tunnel

Φ120 Hypersonic Wind Tunnel Flow Field Calibration

Short-time aerodynamic research for large scale test models in hypersonic wind tunnels

The Design Study of Single Plane Vertical Hard Bearing Dynamic Balancing Machine

Force Measurement and Support Integrated Device in Hypersonic Wind Tunnel

Design of Force-Balance Capacitive Accelerometer

Static Calibration and Dynamic Behaviour of a Six-Component Force Balance for Variable Pressure Water Tunnel Facilities

Measurement technology in hypersonic wind tunnel

Design and application of a micro-force measuring system based on the principle of torsion balance

A New Hypersonic Wind Tunnel Force Measurement System to Reduce Additional Bending Moment and Avoid Time-Varying Stiffness

Study on temperature characteristics and correction of strain gauge balance in actual airflow environment

Ultrasensitive all-fiber inline Fabry-Perot strain sensors for aerodynamic measurements in hypersonic flows

An Air-Bearing Floating-Element Force Balance for Friction Drag Measurement

Note: Precision balance for sub-miliNewton resolution direct thrust measurement

A Measurement Technique On The Hydrodynamic Force On The Free Surface-Piercing Cylinder At A Yawed Angle

Dynamic test experiment system of single degree of freedom of Φ3.2 m wind tunnel

Development and Application of a Novel Four Components Plate Type Hinge Moment Balance

Development of a six-axis force/moment sensor for wind tunnel model test

Design and Research of a Strain Elastic Element with a Double-Layer Cross Floating Beam for Strain Gauge Wireless Rotating Dynamometers

Validation of a torsional balance for thrust measurements of Hall effect and microwave-based space propulsion systems

Design and Experimental Validation of a Micro-Newton Torsional Thrust Balance for Ionic Liquid Electrospray Thruster