Abstract:Drag reduction through turbulent boundary layer control (TBLC) is an essential way to develop green aviation technologies. Compared with traditional approaches for drag reduction, turbulence drag reduction is a relatively new technology, particularly for skin friction drag reduction, and it is becoming a hotspot problem worldwide. This paper focuses on the research of micro fluidic-jet actuators used for outer-layer boundary layer control with high-performance computing (HPC). This study aims to reduce turbulent drag by reshaping the flow structure within the turbulent boundary layer. To ensure the calculation accuracy of the core region and reduce the consumption of computing resources, a zonal LES/RANS strategy and WMLES method are proposed to simulate the effects of fluidic-actuators for outer-layer boundary control, in which high-performance computing has to be involved. The studies are performed on the classical zero-gradient turbulent flat plate cases, in which three different control strategies named “W-control,” “V-control,” and “VW-control” are used and compared to study the effects of drag reduction under a low Reynolds number at Re τ = 470 and a higher Reynolds number at Re τ = 4700. The mechanism for drag reduction is analysed via a pre-multiplied spectral method and a parallel dynamic mode decomposition (DMD) method. The results show that the present approach can effectively simulate the outer-layer turbulent boundary control where the “V-control” with the fluidic-jet actuator array behaves well to achieve an average drag reduction (DR) rate of more than 5% for the high Reynolds number case of the flat plate boundary layer. The high Reynolds shear stress and turbulent kinetic energy distribution in the boundary layer region show an obvious uplift under the effects of actuators, which is the main mechanism for drag reduction.

An Air-Bearing Floating-Element Force Balance for Friction Drag Measurement

Measurement and Determination of Friction Characteristic of Air Flow Through Porous Media

Drag Reduction Via Turbulent Boundary Layer Flow Control

Direct Numerical Simulation of Skin Friction Drag Reduction on Supersonic Turbulent Boundary Layers with Micro-Blowing

Wall shear stress measurement using a zero-displacement floating-element balance

Boundary layer analysis of ventilated partial cavity for friction drag reduction

Design of a Simple and Demountable Experimental Device for Drag Reduction of Super Hydrophobic Surface

Design of a milli-newton force balance for hypersonic rarefied wind tunnel

Measurement technology in hypersonic wind tunnel

Stream-Wise Distribution of Skin-Friction Drag Reduction on A Flat Plate with Bubble Injection

Equilibrium Atmospheric Boundary-Layer Flow: Computational Fluid Dynamics Simulation with Balanced Forces

Interface-resolved Direct Numerical Simulations of the Interactions Between Neutrally Buoyant Spheroidal Particles and Turbulent Channel Flows

Simultaneous Measurements of Surface Spanwise Waves and Velocity in a Turbulent Boundary Layer

Strengthened Opposition Control for Skin-Friction Reduction in Wall-Bounded Turbulent Flows

Decomposition of the mean friction drag on a NACA4412 airfoil under uniform blowing/suction

Frictional drag measurements of large-scale plates in an enhanced plane channel flowcell

Hypersonic Aerodynamic Force Balance Using Micromachined All-Fiber Fabry–Pérot Interferometric Strain Gauges

Theoretical and Numerical Analysis of Drag Force at the Interface Between the Dilute and Dense Phases

Scaling of drag reduction and logarithmic profile in the turbulent boundary layer over micro-grated superhydrophobic surfaces

Numerical Investigations of Outer-Layer Turbulent Boundary Layer Control for Drag Reduction Through Micro Fluidic-Jet Actuators

Static Calibration and Dynamic Behaviour of a Six-Component Force Balance for Variable Pressure Water Tunnel Facilities