Abstract:While standard cell layouts are drawn with minimum design rules to maximize the benefit of design area shrinkage, the complicated design rules have caused difficulties with signal routes accessing the pins in standard cell layouts. As a result, it has become a great challenge for physical layout designers to design a standard cell layout that is optimized for area, power, timing, signal integrity, and printability. Multiple design iterations are required to consider pin accessibility during standard cells layout to increase the number of feasible solutions available to the router. In this work, we will demonstrate several improvements with the Synopsys PAC methodology, such as reducing the number of cells required for each Synopsys 'testcell' with the same cell abutment condition, increasing the complexity of the pin connection for better pin accessibility evaluation. We also recommend additional constraints to improve the probability of detecting pin accessibility issues. We also integrate other physical verification methods to access the design rule compliance and the printability of standard cells. We hope that the easy to use utility enables layout engineers to perform the verification, simplifying the verification methodology.

Development and Verification of A Small Cmos Digital Standard Cell Library Based on Smic 130nm Process

Standard cell library establishment and simulation for scan D flip-flops based on 0.5 micron CMOS mixed-signal process

The Ispd-2012 Discrete Cell Sizing Contest And Benchmark Suite

Standard Cell Library Evaluation with Multiple lithography-compliant verification and Improved Synopsys Pin Access Checking Utility

A 65 nm CMOS Analog Programmable Standard Cell Library for Mixed-Signal Computing

Design Analysis of CMOS Digital Integrated Circuit I/O Cell

A novel layout automation flow to facilitate test chip design for standard cell characterization

Multiple-Lithography-Compliant Verification for Standard Cell Library Development Flow

Sub-threshold standard cell library design for ultra-low power biomedical applications

Development of Standard Cell Library for UMC 0.18 μm Asynchronous Circuit

Design of Digital Standard Cell Based on Silicon Tunnel Field-Effect Transistor

A 0.3V-to-1.1v Standard Cell Library in 40nm CMOS

A 0.6v Standard Cell Library in 40nm Cmos for Near-Threshold Computing

Validation of Standard Cell Library

Design of low-power and high-speed multiplier

An Energy-Efficient Logic Cell Library Design Methodology with Fine Granularity of Driving Strength for Near- and Sub-Threshold Digital Circuits

Efficient Aging-Aware Standard Cell Library Characterization Based on Sensitivity Analysis

Development of TFET 0.13 Μm Standard Cell Library for Ultra-Low Power Applications.

A Deep-submicron Sigma-Delta ADC Design Flow

An improved benchmark suite for the ISPD-2013 discrete cell sizing contest.

Performance-effective compaction of standard cell library for edge-triggered latches utilizing 0.5 micron technology