Abstract:Historically, VLSI designers have focused on increasing the speed and reducing the area of digital systems. However, the evolution of portable systems and advanced Deep Sub-Micron fabrication technologies have brought power dissipation as another critical design factor. Low power design reduces cooling cost and increases reliability especially for high density systems. Moreover, it reduces the weight and size of portable devices. The power dissipation in CMOS circuits consists of static and dynamic components. Since dynamic power is proportional to V2 dd and static power is proportional to Vdd, lowering the supply voltage and device dimensions, the transistor threshold voltage also has to be scaled down to achieve the required performance. In case of static power, the power is consumed during the steady state condition i.e when there are no input/output transitions. Static power has two sources: DC power and Leakage power. Consecutively to facilitate voltage scaling without disturbing the performance, threshold voltage has to be minimized. Furthermore it leads to better noise margins and helps to avoid the hot carrier effects in short channel devices. In this paper we have been proposed the new CMOS library for the complex digital design using scaling the supply voltage and device dimensions and also suggest the methods to control the leakage current to obtain the minimum power dissipation at optimum value of supply voltage and transistor threshold. In this paper CMOS Cell library has been implemented using TSMC (0.18um) and TSMC (90nm) technology using HEP2 tool of IC designing from Mentor Graphics for various analysis and simulations.

Design Analysis of CMOS Digital Integrated Circuit I/O Cell

Design of the Power Management Module Integrated in SOC

Silicon-Validated Power Delivery Modeling and Analysis on a 32-Nm DDR I/O Interface.

A Fast OPC Algorithm for IC Layout Based on 1-D Cells after Optimization of Gap Distribution

Modeling and Characterization of On‐Chip Interconnects

Design Methodology Of Cmos Low Power

CMOS Low Power Cell Library For Digital Design

Basics of Integrated Circuit Design

Analysis and Suppression for Gate Oscillation Caused by Body Diodes on Paralleled SiC MOSFETs Application

Simulation Analysis of Circuit and Designing of PCB Layout of a CMOS based NAND Logic Gate using Open-Source Software eSim

CMOS design of computational current-mode static and dynamic functions based on analog translinear cell

Low-voltage and High-Speed FPGA I/O Cell Design in 90nm CMOS

A 65 nm CMOS Analog Programmable Standard Cell Library for Mixed-Signal Computing

Design and Analysis of Recessed Double Gate Junctionless Field-Effect-Transistor Based Digital Standard Cells

An Overview of Low-Power Digital CMOS Design

A Systematic Study of ESD Protection Co-Design with High-Speed and High-Frequency ICs in 28 Nm CMOS.

A Cross-Process Signal Integrity Analysis (CPSIA) Method and Design Optimization for Wafer-on-Wafer Stacked DRAM

Performance Analysis of Various Complementary Metaloxide Semiconductor Logics for High Speed Very Large Scale Integration Circuits

Design of Current Steering Logic CMOS Circuit

Layout-dependent STI Stress Analysis and Stress-Aware RF/analog Circuit Design Optimization.

The Structure of Dynamic BiCMOS Circuit and Its Switch-Level Design