Abstract:A design method of an off-line switching power-supply controller with properties of high-efficiency and low-power is presented to improve performances of off-line power supplies. The controller was designed on basis of pulse-width modulation (PWM) mode and pulse skipping modulation (PSM) mode. The design method of the controller loop is based on the peak current mode. The controller operates in PWM mode, when the feedback voltage is less than 4.75 V, and works in PSM mode otherwise, ensuring high efficiency. Additional functions, such as short-circuit protection, over-voltage protection, under-voltage lockout, internal slope compensation, leading-edge blanking on current sense are included. For reducing the electromagnetic interference (EMI), the switching frequency is designed to be randomized within the range of 1 kHz at around centre frequency to flatten the power spectral density (PSD). The chip was implemented by using TSMC's 0.6 μm 40 V high voltage BCD process. Simulation results indicate that the controller realizes the required working modes and performs seamless switching between the modes. The controller can be applied to Li-Ion battery charger with a wide range of AC input (85~264 V) or power adapter.

Design of the Power Management Module Integrated in SOC

Design and implementation of a multifunctional management chip for multi-cell Li-ion batteries in series

Design and implementation of off-line switching power-supply controller

A Clock Isolation Technique for Low Power SoC Design

Design and Validate the Chip's Power-Network in DSM

A Self-aware Dynamic Power Management System

Silicon-Validated Power Delivery Modeling and Analysis on a 32-Nm DDR I/O Interface.

Research on low power technology based on Multi Bit Flip Flop

Power Supply Module for System on Chip with Wide Input Range

Hierarchical Timing-driven Layout Based on .25um Technology

Research and Progress of Low Power Design in SOC Era

Programme Design of Reference Voltage Source Module Embedded in LCOS Chip

Design Methodology Of Cmos Low Power

Adaptive Power Management for Nanoscale SoC Design

Power Supply Module Design in the Low Power Consumption Application

Micro-State Based Low Power Design Methodology for Multimedia SOC

The Study of a Battery Energy Storage System Based on the Hexagonal Modular Multilevel Direct AC/AC Converter (Hexverter)

A Multi-Module Current-Source Power Conditioning System (Pcs) For Smes To Improve Voltage Stability Of Microgrid

Low Power Design of Multi-mode Switching Power Supply Controller IC

Design Analysis of CMOS Digital Integrated Circuit I/O Cell

Design of Low-consumption of SoC Systems