Abstract:The technology development of micro-nano electronics in global IC industry is summarized and reviewed in the present paper. There are many challenges and opportunities as the innovative devices and materials have gradually been applied to IC manufacture. As ITRS 2011 Roadmap shows that gate length will shrink to 20 nm in 2013, the industry mainstream manufacturing technologies of the nano-electronics seems moving toward the goal. It is well known that the IC technology development basically depends on material science. In Section 2, some new material and process technologies are highlighted, such as strained silicon, high K and metal gate, ultra-low K, 450 mm silicon wafer, and immersion lithography technologies are the foundation of IC manufacture. The process integration for advanced CMOS manufacture technology is discussed in Section 3. As an example, 20 nm process flow scheme is explained and some comparison is made to the precious generation technology. The main process flow difference between 28 nm technology and 20 nm technology is illustrated and some explanations are presented. In Section 4, 3D system packaging technology is introduced. Some preliminary TSV experimental data made by SMIC are shown. It is expected that 3D TSV Wide I/O would eventually be inevitable in 28 nm production and beyond. In Section 5, the research and development of nonvolatile memory are summarized, such as RRAM, PcRAM and MRAM. Some lab experimental and measurement results from SMIC are demonstrated. It is believed that PcRAM, which is relatively mature technology, mass production will probably come up in the mainland in a few years. In Section 6, a couple of new transistor architectures are introduced and some experimental data are demonstrated, such as local SOI and GAA, and some experimental data are shown. Finally, the comments for domestic R&D strategy in IC area are proposed to future IC R&D direction.

Hierarchical Timing-driven Layout Based on .25um Technology

Design of the Power Management Module Integrated in SOC

Hierarchical Layout Design of 8vsb Chip

Post-fabrication measurement-driven oxide breakdown reliability prediction and management.

Fast Timing Closure Layout Design Based on Region Constraints

A Fully Automated Large-Scale Addressable Test Chip Design with High Reliability

HierSyn: Fast Synthesis for Large Hierarchical Designs

A new methodology of integrating high level synthesis and floorplan for soc design

Eliminating Timing Errors Through Collaborative Design to Maximize the Throughput

A New Timing-Driven Placement Algorithm Based on Table-Lookup Delay Model

The Physical Design Solution for Million-Gate SoC under VDSM

Exploiting Challenges of Sub-20 nm CMOS for Affordable Technology Scaling

Ultrathin Small Outline Package Key Techniques for High-Speed Chips with Multi-Leads

Base on Hierarchical Method Backend design of EOS chip

Area efficient layout design of CMOS circuit for high-density ICs

Data-path layout design inside SOC

A Timing-driven Analytical Placer for Gate-Level Partitioned Monolithic 3D ICs

Hierarchical timing-driven initial placement for row-based ICs

System Level Design of SOC

A Reconfigurable AHB Interface Component for SOC

Non-probabilistic reliability-based structural design optimization based on the interval analysis method