Abstract:Computer-Aided Design (CAD) tools are extensively used throughout all of the steps in a VLSI design flow. The physical design domain is one of the three domains that are conceptually abstracted in representing a VLSI design flow. This research work focuses on three areas in VLSI physical design domain: clock tree design and buffer insertion, interconnect model order reduction and LVS verification. First, an optimal buffer insertion for clock delay and skew minimization algorithm is developed based on the theory that the minimal clock delay can be obtained by equalizing derivatives of a convex function, and the minimal clock skew can be achieved by equalizing delay functions of different source-to-sink paths. Experimental results show that the presented algorithm achieves both minimal delay and skew in real clock tree design. Further, an automatic clock tree design algorithm is developed for realizing the pre-specified clock arrival time requirements that often occur in an IP block based design environment. In this proposed strategy, planar clock routing and buffer insertion are carried out simultaneously to minimize clock delay and skew, and a full waveform simulation is applied to ensure the signal integrity necessary for high-speed VLSI design. Second, an efficient balanced truncation realization algorithm is presented for interconnect model order reduction. This algorithm shows that there is no need to solve the whole Lyapunov equation for controllability and observability grammians before obtaining approximation to their predominant spaces, and a linear order reduction algorithm can be achieved by extending the O(n) Krylov Subspace Oblique Projection method. Finally, a unique LVS methodology is proposed for the verification of a quad-core microprocessor designed with a triple-well 90-nm CMOS technology. Due to the IP reuse, the standard LVS flow is incapable of handling the additional design complexity in verifying the LVS for the chip designed with multiple power domains. This proposed LVS strategy consists of two phases. The first phase involves verifying LVS at the block level as well as the full-chip level. The second phase aims at verifying the integrity of the multi-power-domain power grid. The proposed LVS methodology was successfully verified by real silicon.

The Physical Design Solution for Million-Gate SoC under VDSM

Physical design optimization of MOSFETs for millimeter wave and sub-millimeter wave circuits

Design and Verification of High-Speed VLSI Physical Design.

Early-Stage Power Grid Design: Extraction, Modeling and Optimization

Hierarchical Timing-driven Layout Based on .25um Technology

Early-Stage Power Grid Design

VLSI Design Automation Procedure to Optimize SSN Performance

Algorithms and Methodology in Physical Domain Optimization for High-Performance Vlsi Design

A Practical and Efficient Integrated System for VLSI/ULSI Physical Design

Physical Design of the "2.5D" Stacked System

A new methodology of integrating high level synthesis and floorplan for soc design

Design Methodology Of Cmos Low Power

Advances and Challenges in 3D Physical Design.

Low-Power Methods Research of SoC Physical Design

Parallel cross-layer optimization of high-level synthesis and physical design

Comprehensive Physical Design Flow Incorporating 3D Connections for Monolithic 3D ICs

A new methodology of integrating high level synthesis and floorplanning for nanometer regime design

Physically Aware Synthesis Revisited: Guiding Technology Mapping with Primitive Logic Gate Placement

An MTCMOS Technology for Low-Power Physical Design

A Low-Latency and Low-Power Hybrid Insertion Methodology for Global Interconnects in VDSM Designs

Multi-objective Aware Design Flow for Coarse-Grained Systems on Chip