Abstract:Historically, VLSI designers have focused on increasing the speed and reducing the area of digital systems. However, the evolution of portable systems and advanced Deep Sub-Micron fabrication technologies have brought power dissipation as another critical design factor. Low power design reduces cooling cost and increases reliability especially for high density systems. Moreover, it reduces the weight and size of portable devices. The power dissipation in CMOS circuits consists of static and dynamic components. Since dynamic power is proportional to V2 dd and static power is proportional to Vdd, lowering the supply voltage and device dimensions, the transistor threshold voltage also has to be scaled down to achieve the required performance. In case of static power, the power is consumed during the steady state condition i.e when there are no input/output transitions. Static power has two sources: DC power and Leakage power. Consecutively to facilitate voltage scaling without disturbing the performance, threshold voltage has to be minimized. Furthermore it leads to better noise margins and helps to avoid the hot carrier effects in short channel devices. In this paper we have been proposed the new CMOS library for the complex digital design using scaling the supply voltage and device dimensions and also suggest the methods to control the leakage current to obtain the minimum power dissipation at optimum value of supply voltage and transistor threshold. In this paper CMOS Cell library has been implemented using TSMC (0.18um) and TSMC (90nm) technology using HEP2 tool of IC designing from Mentor Graphics for various analysis and simulations.

An MTCMOS Technology for Low-Power Physical Design

Physical design optimization of MOSFETs for millimeter wave and sub-millimeter wave circuits

Improving Dual V T Technology by Simultaneous Gate Sizing and Mechanical Stress Optimization

Impacts of the MTCMOS technology on power supply network: a full-chip perspective

Research on low power technology based on Multi Bit Flip Flop

Design Methodology Of Cmos Low Power

A Cross-Layer Approach for Early-Stage Power Grid Design and Optimization.

Sleep Transistor Sizing for Multi-Threshold-voltage Network Using Lagrange SOR Iteration

1-V power supply high-speed digital circuit technology with multithreshold-voltage CMOS

An Efficient Hamiltonian-cycle Power-Switch Routing for MTCMOS Designs.

Power Optimization Techniques in CMOS IC Design

Low-power CMOS digital design

CMOS Low Power Cell Library For Digital Design

An Overview of Low-Power Digital CMOS Design

Gate Oxide and Implantation Process Co-Optimization for Low-Power MCU Applications

Global approach for CMOS circuit optimization by transistor resizing

A Low Power Localized 2T1R STT-MRAM Array with Pipelined Quad-Phase Saving Scheme for Zero Sleep Power Systems.

CMOS design of computational current-mode static and dynamic functions based on analog translinear cell

TSF3D: MSV-Driven Power Optimization for Application-Specific 3D Network-on-Chip

Logic and Layout Aware Voltage Island Generation for Low Power Design

Simultaneous Fine-grain Sleep Transistor Placement and Sizing for Leakage Optimization