Hierarchical Layout Design of 8vsb Chip

XX Han,XR Zhu,W Zheng,M Zhang,QX He

DOI: https://doi.org/10.1109/icccas.2002.1179045

2002-01-01

Abstract:8VSB chip is used to decode the ATSC compliant cable channel signals. This paper presents a new approach to hierarchical layout design of 8VSB chip. Experiments show that our method can accelerate timing convergence and shorten design period.

What problem does this paper attempt to address?

Hierarchical Timing-driven Layout Based on .25um Technology

韩晓霞,张明,吴万里,姚庆栋

DOI: https://doi.org/10.3969/j.issn.1007-0249.2001.04.012

2001-01-01

Abstract:Integrated circuit design has been developed into the VDSM-based SOC era. SOC means the whole system can be integrated into one chip. However, SOC design with VDSM technology encounters difficulties arising from large scale, complexity and high clock frequency. These problems cannot be overcome by traditional design process because of its design-scale limitation and slow convergence of timing. Traditional flatten layout method are not robust enough to deal with large quantity of data coming out from design process. Therefore, a complete SOC design process with associated hierarchical timing-driven layout method is proposed, in which top-down constraint budget and timing-driven strategy are used to obtain timing convergence, while hierarchical module partitioning can cope with the large scale of SOC. The result of 600k 8VSB chip design experiment with 0.25um technology provided a speed of 108Mhz.
A new VLSI design for Viterbi decoder based on ASIP

Zhiqiang Yi,Yuanxin Xu,Yun Li,Kuang Wang

DOI: https://doi.org/10.1109/ICCCAS.2002.1179065

2002-01-01

Abstract:Trellis Code Modulation (TCM) has been widely used because it can obtain 2.55∼7.37 dB coding gain without bandwidth expansion or reduction of the effective information rates. Since Viterbi decoder plays an important role in the realization of HDTV system, we conduct the research and development on integration of Viterbi decoder. This paper proposes a new VLSI design of Viterbi decoder using ASIPs based on hardware/software co-design idea. It reduces the total design time and enhances the reliability of VLSI. We have successfully used this method for the design of Viterbi decoder in the ASTC-HDTV receiver chip.
Circuit design of a 8-state 32QAM Viterbi decoder

Yan Han,Kuang Wang,Qingdong Yao

1996-01-01

Tien Tzu Hsueh Pao/Acta Electronica Sinica

Abstract:Trellis Coded Modulation (TCM) has been widely used because it can obtain 2.55-7.37 dB coding gain without bandwidth expansion or reduction of the effective information rates. Since Viterbi Decoder (VD) plays an important role in the realization of HDTV system, the research and development on integration of VDs were conducted. factors which affect the performance of VDs and their solutions was studied. A completed VLSI circuit design for an 8-state 32QAM VD (30,000 gates in scale) is also reported.
A New VLSI Design for Decoding of Reed-Solomon Codes Based on ASIP [HDTV]

YX Xu,F Xia,QD Yao,PL Qui,K Wang

DOI: https://doi.org/10.1109/icasic.2001.982597

2001-01-01

Abstract:Reed Solomon (RS) codes providing an efficient capability for correcting burst errors have been widely used. Some work has already been done in developing VLSI decoders for RS codes. This paper proposes a new VLSI design of RS decoder using ASIP based on software ideas. It shortens the design time and enhances the reliability of VLSI. We have successfully used the method for the design of RS decoder (207, 187) in the ATSC-HDTV receiver chip
Design of a HDTV Audio Decoder on a Fixed Point DSP Chip

ZHANG Jin,XU Yuan-xin,ZHANG Ji,WANG Kuang

DOI: https://doi.org/10.3969/j.issn.1671-7147.2005.03.003

2005-01-01

Abstract:The paper describes a DVB based HDTV audio decoder used in multi-channel extension and presents an improved algorithm for the synthesis filter bank. It is found that when the symmetry of coefficient and the similarity of the allocation tables, computational amount and memory size are reduced by more than 50%. DSP/BIOS operating system simplifies developing various DSP systems. This decoder can also be used in Digital Audio Broadcasting systems.
An Implementation Scheme of Symbol-Processing in DVB-S Receiver

YI Zhi-qiang,Huang Zhi-jie,WANG Kuang

DOI: https://doi.org/10.3969/j.issn.1001-7119.2005.04.019

2005-01-01

Abstract:This paper proposes an implementation scheme of symbol-processing in DVB-S receiver. By using Secondary Encode and special sync-searching byte-recovering circuits, not only the processing time reduces remarkably, but also needs less hardware resource. This scheme has already been applied in the chip design of satellite digital television.
A Bit-Rearrangement Based Method to Reduce SSN of DDR Interface in STB Chip Design

Jun LIANG,Jian-bing YE,Hong-hai WANG,Ming ZHANG

DOI: https://doi.org/10.3969/j.issn.0372-2112.2014.03.024

2014-01-01

Abstract:The SSN (Simultaneous Switching Noise) caused by parasitic inductance of low cost QFP (Quad Flat Package) package limits the DDR (Double Date Rate ) interface data transfer rate of STB (Set Top Box ) chip .This paper discusses the video data interdependency and DDR bus bit interchangeability ,and proposes a bit-rearrangement method to reduce SSN of DDR inter-face .The video data used in STB chip has strong correlation in two space dimensions .Logic bits of DDR bus are physically inter-laced according to specific algorithm during layout design phase ,which makes spatial distribution of DDR output drive current more balanced .The balanced distribution decreases average current running through each pair of power/ground pin and reduces SSN ac-cordingly .This method is applied in a HDTV (High Definition TeleVision ) chip on TSMC (Taiwan Semiconductor Manufacturing Company ) 55nm process .The DDR data transfer rate of the test chip in QFP package attains 1066Mbps .
Fast Timing Closure Layout Design Based on Region Constraints

XX Han,M Zhang,QD Yao

DOI: https://doi.org/10.3785/j.issn.1008-973x.2004.03.005

2003-01-01

Abstract:A new method for layout design based on region constraints is presented and the corresponding design flow is developed. Fast timing closure is achieved by using region constraints to mitigate the problem of lots of scatter intrinsic in the wire-load model in order to improve the accuracy of estimated interconnect delay in the logic synthesis phase. The global interconnects are optimized by layout design tools. The method has been verified on commercial plaforms with the design of a 500K ATSC-8VSB channel receiver chip using. 18um technology.
An efficient all digital VSB modulator for HDTV terrestrial broadcasting

Zhaoyang Zhang,Peiliang Qiu

DOI: https://doi.org/10.1109/30.846657

2000-01-01

IEEE Transactions on Consumer Electronics

Abstract:This paper presents an efficient all digital implementation method of VSB modulator used for HDTV terrestrial transmission. It uses only four simple similar spectrum shaping filters to complete the VSB signal generation and the pilot insertion is novelly optimized to several addition operations, which greatly reduces the hardware complexity. Most of the circuitry runs at a speed of only half of the input symbol rate, which results in relatively low power consumption. Furthermore, the presented architecture is able to complete the QAM modulation via only bypassing a few logic components. Prototypes implemented by this method are now under field trial, and it has already shown good spectrum quality. This method is quite suited for VLSI implementation
A High-Performance VLSI Architecture for CABAC Decoding in H.264/AVC

Li Bingbo,Zhang Ding,Fang Jian,Wang Lianghao,Zhang Ming

DOI: https://doi.org/10.1109/icasic.2007.4415749

2007-01-01

Abstract:A mixed hardware/software architecture for CABAC decoding in H.264/AVC is proposed in this paper. For the purpose of flexibility, ctxldx calculation process is implemented by software, while others are implemented by hardware. An optimized parallel decoding architecture that allows decoding two binary symbols at one clock cycle is designed to enhance overall decoding performance. An efficient scheme of accessing context models is presented. Experimental results show that the proposed architecture improves the decoding performance by 20% compared to conventional scheme. The proposed design can achieve HDTV 1080i video processing requirement when operated at 140 MHz.
System-on-chip Design for a Statistical Decoder

Liang-Hao Wang,Zheng Zhu,Kai Luo,Bingbo Li,Ming Zhang

DOI: https://doi.org/10.1109/icasic.2007.4415793

2007-01-01

Abstract:In this paper, we propose a system-on-chip software hardware co-design for a statistical decoder. We use the context-based adaptive binary arithmetic decoder (CABAC decoder) used in the High profile of the H.264/AVC video coding standard as a design example. The design is aimed to strike a balance between software modules and hardware modules based on design constraints. It is capable of decoding one bin per clock cycle at high clock frequencies while maintaining a slim hardware footprint. Compared to existing statistical decoders, this design is aimed for a fast and compact IP core, well verified with standard video test sequence, and ideal for a SoC implementation.
DDR Controller Design for STB with Low SSN

LIANG Jun,ZHANG Ming

DOI: https://doi.org/10.3969/j.issn.1002-8692.2013.19.025

2013-01-01

Abstract:The SSN with low cost QFP package inductor is one of the important causes which limit the DDR transfer rate of STB chip. In this paper,video data toggle situation is discussed and a data rewrite based DDR controller is proposed. This method changes a high data toggle rate write transaction into 2 low data toggle rate write transactions with DM signals of DDR chip. Simulation result shows that this method can reduce SSN with acceptable cost.
Parametric Design of RS Decoding Module in HDTV

张力,徐元欣,王匡,张明

DOI: https://doi.org/10.3969/j.issn.1002-8692.2004.03.017

2004-01-01

Abstract:In this paper, a generally applicable design of RS decoding module is put forward, synthesizing Reed-Solomon codes in different HDTV standards, and the design result is satisfactory.
Implementation Scheme of VSB Modulation

ZY Zhang,PL Qiu,K Wang,QD Yao

DOI: https://doi.org/10.1109/isce.1997.658353

1997-01-01

Abstract:This paper describes the realization of the VSB modulation subsystem of the VSB-based HDTV terrestrial broadcasting system, which is part of China's HDTV development project. It gives an overview of the system requirements, as well as some basic considerations of the hardware implementation. Algorithms, and architectures of the main modules, such as the modulator, the carrier phase tracking loop, and the timing recovery loop, are presented, and the implementation results and features are also described.
Array Based HV/VH Tree: an Effective Data Structure for Layout Representation.

Jie Ren,Wei-wei Pan,Yong-jun Zheng,Zheng Shi,Xiao-lang Yan

DOI: https://doi.org/10.1631/jzus.c1100193

2012-01-01

Journal of Zhejiang University SCIENCE C

Abstract:We present a new data structure for the representation of an integrated circuit layout. It is a modified HV/VH tree using arrays as the primary container in bisector lists and leaf nodes. By grouping and sorting objects within these arrays together with a customized binary search algorithm, our new data structure provides excellent performance in both memory usage and region query speed. Experimental results show that in comparison with the original HV/VH tree, which has been regarded as the best layout data structure to date, the new data structure uses much less memory and can become 30% faster on region query.
Bus Design for HDTV SoC Decoder

李东晓,姚庆栋,刘鹏,周莉

DOI: https://doi.org/10.3969/j.issn.1007-0249.2003.03.018

2003-01-01

Abstract:Bus design methodology for the HDTV system-on-a-chip (SoC) decoder is presented. Time sliced arbitration scheme, incorporated with synchronization control of HDTV decoding, is employed in the bus design process. The bus data transmissions are scheduled elaborately to cooperate with the HDTV decoding process. The objective of proposed bus design approach is to utilize the bus bandwidth efficiently and reduce the amount of internal data buffers sufficiently. Following this approach, hardware cost can be reduced while the required real time performance is assured.
High performance CABAC decoder architecture

WANG Yong,ZHAN Chen-chang,ZHAO Shuang,ZHOU Xiao-fang,ZHOU Dian

DOI: https://doi.org/10.3321/j.issn:1002-8331.2007.14.029

2007-01-01

Abstract:To support HDTV application,a high performance CABAC hardware decode architecture is proposed in this paper.Through the high performance SRAM organization,the decoder improve the SRAM access efficiency at the same time reduce the SRAM area.The high efficient decoder architecture make it possible that 1 bit syntax element can be decoded in one clock cycle,and the decoding speed improved compare with current decoder and software.So the decoder can satisfy the decoding speed of main profile H.264 bits stream based on HDTV application by fully hardware.
Design and implementation of high speed convolution decoder for UWB

Jin Yingguang,Pei Yukui,Ge Ning,Wang Youzheng

2009-01-01

JOURNAL OF ELECTRONIC MEASUREMENT AND INSTRUMENT

Abstract:Chip design of convolution decoder for ultra-wide band(UWB) system is involved with two challenges-high speed and low power consumption.Based on the analysis of different algorithms and structures of viterbi decoding,an architecture of parallel trace-back decoder suitable for ASIC implementation is proposed.At the cost of 30%memory resource,this structure increases the number of the parallel trace-back branches,thus decreases frequency to half of the traditional one.Simulation and experiment results show that,without performance degradation,the speed of a single module is up to 220Mbps,while its delay is only 2.4μs,which adapts to burst mode with low delay.
A Flexible VLSI Architecture of Transport Processor for an AVS HDTV Decoder SoC

Zhenrui Zhang,Di Wu,Peng Zhang,Don Xie,Wen Gao

DOI: https://doi.org/10.1109/tce.2006.273166

2006-01-01

IEEE Transactions on Consumer Electronics

Abstract:In this paper, we present a VLSI design of transport processor for an AVS HDTV decoder SoC. The design provides a flexible data flow, which supports both broadcasting service and IPTV service with DVR capability. The design is characterized by two-bus architecture, in which a RISC CPU is used for control of general purpose and some dedicated hardware for accelerating data processing. The common on-chip SRAM is used to store input transport packets and the intermediate result in order to improve system performance and reduce the area. The design is described in Verilog HDL, simulated with VCS simulator, and implemented using 0.18 mum CMOS cell library. The circuit costs about 75 k equivalent logic gates and the processing capability is up to 90 Mbps
An efficient VLSI architecture for CBAC of AVS HDTV decoder

Junhao Zheng,Wen Gao,David Wu,Don Xie

DOI: https://doi.org/10.1016/j.image.2008.12.007

2009-01-01

Abstract:Context-based Binary Arithmetic Coding (CBAC) is a normative part of the newest X Profile of Advanced Audio Video coding Standard (AVS). This paper presents an efficient VLSI architecture for CBAC decoding in AVS. Compared with CBAC in H.264/AVC, the simpler binarization methods and context selection schemes are adopted in AVS. In order to avoid the slow multiplications, the traditional arithmetic calculation is transformed to the logarithm domain. Although these features can obtain better balance between the compression gain and implementation cost, it still brings huge challenge for high-throughput implementation. The fact that current bin decoding depends on previous bin results in long latency and limits overall system performance. In this paper, we present a software-hardware co-design by using bin distribution feature. A novel pipeline-based architecture is proposed where the arithmetic decoding engine works in parallel with the context maintainer. A finite state machine (FSM) is used to control the decoding procedure flexibly and the context scheduling is organized carefully to minimize the access times of context RAMs. In addition, the critical path is optimized for the timing. The proposed implementation can work at 150MHz and achieve the real-time AVS CBAC decoding for 1080i HDTV video.

Hierarchical Layout Design of 8vsb Chip

Hierarchical Timing-driven Layout Based on .25um Technology

A new VLSI design for Viterbi decoder based on ASIP

Circuit design of a 8-state 32QAM Viterbi decoder

A New VLSI Design for Decoding of Reed-Solomon Codes Based on ASIP [HDTV]

Design of a HDTV Audio Decoder on a Fixed Point DSP Chip

An Implementation Scheme of Symbol-Processing in DVB-S Receiver

A Bit-Rearrangement Based Method to Reduce SSN of DDR Interface in STB Chip Design

Fast Timing Closure Layout Design Based on Region Constraints

An efficient all digital VSB modulator for HDTV terrestrial broadcasting

A High-Performance VLSI Architecture for CABAC Decoding in H.264/AVC

System-on-chip Design for a Statistical Decoder

DDR Controller Design for STB with Low SSN

Parametric Design of RS Decoding Module in HDTV

Implementation Scheme of VSB Modulation

Array Based HV/VH Tree: an Effective Data Structure for Layout Representation.

Bus Design for HDTV SoC Decoder

High performance CABAC decoder architecture

Design and implementation of high speed convolution decoder for UWB

A Flexible VLSI Architecture of Transport Processor for an AVS HDTV Decoder SoC

An efficient VLSI architecture for CBAC of AVS HDTV decoder