Abstract:Direct bonding is an attractive technique for joining two mirror polished surfaces without any intermediate materials. Vacuum ultraviolet (VUV) irradiation is an effective way for cleaning surfaces as well as increasing hydrophilicity with less surface damage. However, its applications for the direct bonding of silicon and quartz glasses have seldom been explored. Therefore, in this paper, a vacuum ultraviolet/ozone (VUV/O3) activated direct bonding method for Si/Si and quartz/quartz was developed. A defect-free interface with high bonding strength was achieved after a low-temperature annealing process at 200 °C. According to water contact angle, Raman spectroscopy, atomic force microscopy, and transmission electron microscopy measurements, we demonstrated an understanding of the beneficial surface treatments from VUV irradiation. Then two models for Si/Si and quartz/quartz bonding were established separately based on low-temperature water stress corrosion. Our studies found that the increase of surface roughness with the extension of VUV irradiation time was attributed to the oxide asperities generated on the irradiated surfaces, which possessed strong deformability under the water stress corrosion effect. The excellent bonding benefits from the saturated silanol groups formed on the VUV irradiated surfaces and the positive effects of the interfacial water on the gap closure during the annealing process.

VUV/O3 Activated Bonder for Low-Temperature Direct Bonding of Si-based Materials

Mechanisms for low-temperature direct bonding of Si/Si and quartz/quartz via VUV/O3 activation

Research on Silicon-Glass Thermal Bonding with SiO2 Film Assist

Research on Silicon-Glass Direct Bonding at Room Temperature

Low Temperature Au-In-Au Metallic Bonding and Its Application in the Fabrication of Vcsels

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

Effect of Combined Hydrophilic Activation on Interface Characteristics of Si/Si Wafer Direct Bonding

Low-Temperature III–V Direct Wafer Bonding Surface Preparation Using a UV-Sulfur Process

A Model of Low‐Temperature Wafer Bonding And Its Applications

Low Temperature Hydrophilic SiC Wafer Level Direct Bonding for Ultrahigh-Voltage Device Applications

UV Activation Treatment for Hydrophobic Wafer Bonding

Low Temperature Cu/SiO2 Hybrid Bonding with Protruding Copper Pads

A two-step surface treatment for enhanced hydroxide-catalyzed glass bonding

Low Temperature Direct InP/SOI Wafer Bonding Based on Hydrophilic/hydrophobic Treatment

Study of a silicon/glass bonded structure with a UV-curable adhesive for temporary bonding applications

Low‐temperature bonding of glasses: The role of plasma‐engrafted surface amino groups

Direct wafer bonding of Ga2O3–SiC at room temperature

A Simple Low-Temperature Glass Bonding Process with Surface Activation by Oxygen Plasma for Micro/Nanofluidic Devices

Properties of room temperature bonded and UV cured temporary bonding adhesive for ultra-thin wafer's handling

A novel method of anodic bonding

Low temperature Cu/SiO 2 hybrid bonding via 〈1 1 1〉-oriented nanotwinned Cu with Ar plasma surface modification