Abstract:The microstructure of a quartz glass surface was processed at a low power density using the picosecond laser-induced plasma-assisted ablation (LIPAA) processing method. A low power density can effectively prevent edge collapse, cracks, and other defects in hard and brittle materials. The surface morphologies of the samples were characterized using scanning electron microscopy and three-dimensional laser scanning microscopy. The surface chemical components of the samples were analyzed using energy-dispersive spectrometry and X-ray photoelectron spectroscopy. After processing, the surface exhibited a micro-/submicron multi-scale structure. After 1H, 1H, 2H, 2H-perfluorodecyltriethoxysilane modification, the surface can exhibit superhydrophobic properties such as a contact angle of 153°, sliding angle of 0°, and one-time bounce of water droplets. The transmittance of the superhydrophobic samples to the entire spectrum was maintained at more than 90%. The surface microstructure and superhydrophobic properties could be adjusted by changing the laser scanning speed. At high scanning speeds, the roughness of the sample decreased; therefore, the light transmittance increased gradually, whereas the hydrophobicity decreased gradually. Through the LIPAA method, we realized superhydrophobicity with high transmittance of transparent materials. The LIPAA can potentially be employed for the fast and effective fabrication of superhydrophobic surfaces with complex microscale patterns combined with submicron features.

A two-step surface treatment for enhanced hydroxide-catalyzed glass bonding

Research on Silicon-Glass Thermal Bonding with SiO2 Film Assist

Mechanisms for low-temperature direct bonding of Si/Si and quartz/quartz via VUV/O3 activation

Research on Silicon-Glass Direct Bonding at Room Temperature

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

Transition-free indirect bonding towards 3D multi-layer glass stacking

Effect of Combined Hydrophilic Activation on Interface Characteristics of Si/Si Wafer Direct Bonding

Low‐temperature bonding of glasses: The role of plasma‐engrafted surface amino groups

Two-step joining of reaction bonded silicon carbide (RBSC) using borosilicate glass

Mechanism for the effects of surface chemical composition and crystal face on the wettability of α-quartz surface

High‐throughput laser‐based surface functionalization for fabrication of superhydrophobic soda‐lime glass

Chemical surface modification of lithium disilicate needles of a silica-based ceramic after HF-etching and ultrasonic bath cleaning: impact on the chemical bonding with silane

An Experiment to Test the Mechanical Losses of Different Bonding Techniques in Fused Silica

Efficient Fabrication of Quartz Glass Using Laser Coaxial Powder-Fed Additive Manufacturing Approach

Development of core–shell SiO 2 @A-TiO 2 abrasives and novel photocatalytic chemical machinal polishing for atomic surface of fused silica

Surface co-silanization engineering to enhance amine functionality for adhesive heterojunction and antimicrobial application

Atomic surface of quartz glass induced by photocatalytic green chemical mechanical polishing using the developed SiO 2 @TiO 2 core–shell slurry

Silicon–glass Wafer Bonding with Silicon Hydrophilic Fusion Bonding Technology

Transparent superhydrophobic glass prepared by laser-induced plasma-assisted ablation on the surface

Hydrogel-mediated semiconductor wafer bonding

Using in-situ conversed nano SiC to bond UHTC particles and construct anti-ablation coating