Abstract:Fused silica glasses are of great importance for applications in optics, photonics, electronics, and biochemistry. However, their harsh processing nature still constrains the design and development of fused silica glasses for advanced applications. Additive manufacturing (AM) is among the promising techniques to improve the fabrication of fused silica glasses. Herein, we develop an integrated paste printing and laser in-situ melting technology to additively manufacture fused silica glasses without post-heat-treatments. For every layer, the fused silica paste was first printed by an air-pumped dispenser based on the predesignated CAD model, and subsequently melted by a CO 2 laser to become transparent glasses. To improve the paste printing process, the shear thinning property of the developed fused silica paste was investigated to evaluate the printability of the paste, and the control strategy of the paste printing parameters was developed for precise thickness control of the printed paste layer. By optimizing the laser processing parameters, the surface waviness and roughness of the laser-melted glass layers were effectively minimized, indicating the surface uniformity was improved. To evaluate the optical properties of the laser-melted glasses, the optical transmittance and refractive indices of the fused silica glasses melted by different laser powers were characterized. Through stacking the laser-melted fused silica glasses layer-by-layer, three-dimensional (3D) fused silica glass components with unusual thin-wall structures and embedded microfluidic channels have been directly printed, demonstrating that the developed glass AM technology is promising for advanced applications such as microfluidics, integrated optics, and metamaterials.

Efficient Fabrication of Quartz Glass Using Laser Coaxial Powder-Fed Additive Manufacturing Approach

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Direct additive manufacturing of transparent fused silica glasses using an integrated paste printing and laser in-situ melting technology

Numerical Analysis of the Temperature Field during Single-pass Two-layers Laser Additive Manufacturing of Fused Silica Glass

Comparison of Volumetric to Surface Heating for Filament-Fed Laser Heated Additive Manufacturing of Glass

Study on Microstructure and Mechanical Properties of Femtosecond Laser Welding of Non-Optical Contact Quartz Glass and Zr-4

Laser Powder Bed Fusion of SiO2/AlSi10Mg Composite Material

Research on a Micro-Processing Technology for Fabricating Complex Structures in Single-Crystal Quartz

Femtosecond Laser Single-pass High Quality Direct Cutting Thin Quartz Glass Process Based on Filament Effect

Liquid-Assisted Femtosecond Laser Precision-Machining of Silica.

Prediction Model for Liquid-Assisted Femtosecond Laser Micro Milling of Quartz without Taper

Rapid Fabrication of Smooth Micro-Optical Components on Glass by Etching-Assisted Femtosecond Laser Modification

A two-step surface treatment for enhanced hydroxide-catalyzed glass bonding

Transparent superhydrophobic glass prepared by laser-induced plasma-assisted ablation on the surface

High-Strength Welding of Silica Glass Using Double-Pulse Femtosecond Laser under Non-Optical Contact Conditions

Infrared Pulsed Picosecond Laser-Induced Plasma-Assisted Ablation of Micro-textures on Quartz Surface

Robust metallic micropatterns fabricated on quartz glass surfaces by femtosecond laser-induced selective metallization

Fabrication of beam shapers in the bulk of fused silica by femtosecond laser pulses.

Research on Laser-Assisted Micro-Milling of Fused Silica

Fabrication by stereolithography of fiber-reinforced fused silica composites with reduced crack and improved mechanical properties