Abstract:Melt-grown oxide eutectic ceramics are well known for their excellent mechanical properties and microstructural stabilities at ultra-high temperatures. Laser powder bed fusion (LPBF) provides a novel technology for manufacturing materials with large sizes and complex structures. However, crack controlling is a serious challenge in this process owing to the intrinsic brittleness of ceramic materials. In this study, LPBF method is applied to fabricate Al2O3/GdAlO3/ZrO2 ternary eutectic ceramics assisted by a finite element method (FEM) to investigate an optimized process and innovatively reveal the crack formation mechanism and propagation behavior via a single track, a single layer, and multilayers. Temperature and thermal stress distributions under different process parameters are obtained. The maximum tensile stress & sigma;y (in front of and behind the edge of the molten pool) perpendicular to the scanning direction induces a longitudinal crack, the tensile stress & sigma;x (at the side rim of the molten pool) parallel to the scanning direction induces a transverse crack, and the shearing stress on the XY plane promotes the deflection of the transverse crack on one side of the single track. In the multilayer, the maximum principal stress occurs at the margin zone of the deposition. The maximum principal stress increases at the first three layers and then decreases after the fourth layer. Based on the simulation result, the as-solidified Al2O3/GdAlO3/ZrO2 eutectic ceramics with multiple shapes, such as cylindrical, cubic with round corners, triangular prism, and quadrangular, with dimensions of 30 mm (width or diameter) x 30 mm (length or diameter) x 1 mm (height) and ultra-fine eutectic microstructures (eutectic spacing of approximately 88 nm) are fabricated by LPBF, providing a significant potential to overcome the bottleneck for fabricating large-size and complex-structure ceramics directly in a single-step process. This work provides theoretic foundation and technical support for preparation of ultra-high temperature solidified oxide eutectic ceramics with ultra-fine microstructures and complex structures directly, which has great application potential in fields as aerospace, machinery, and chemical industry.

Crucible-free Fabrication of ZrB2–SiC Composite Ceramics with Ultra-Fine Eutectic Microstructure by Laser Surface Zone-Melting: the Selection of Lasers

Microstructure and mechanical properties of ZrB2-SiC eutectic composite ceramic fabricated by laser surface zone-melting: The effect of laser power and scanning speed

Laser ablation behavior and mechanism of Cf/SiC–ZrC ultra-high temperature ceramic matrix composite prepared by PIP method

Directly fabricated Al2O3/GdAlO3 eutectic ceramic with large smooth surface by selective laser melting: Rapid solidification behavior and thermal field simulation

Low temperature sintering of ZrC-SiC composite

Ablation behavior and mechanisms of 3D Cf/ZrB2-SiC composite applied in long-term temperature up to 2400 °C

Enhanced mechanical properties and thermal shock resistance of Cf/ZrB2-SiC composite via an efficient slurry injection combined with vibration-assisted vacuum infiltration

Outstanding Mechanical and Ablation Resistance of C/C–ZrC–W Composites Prepared Via Slurry Impregnation and Reactive Melt Infiltration at 1500 ℃

Processing, microstructure, and mechanical properties of chopped SiC fibers reinforced ZrB2–hBN–based composites

Microstructural Characterization of Nanostructured Al2O3-ZrO2 Eutectic Layer by Laser Rapid Solidification Method

Large-size Complex-Structure Ternary Eutectic Ceramic Fabricated Using Laser Powder Bed Fusion Assisted with Finite Element Analysis

Ablation behavior and mechanisms of 3D C<sub>f</sub>/ZrB<sub>2</sub>-SiC composite applied in long-term temperature up to 2400 C

Ablation behaviour of Csf/ZrB2-SiC composites fabricated by direct ink writing and reactive melt infiltration

Grain Size Dependence, Mechanical Properties and Surface Nanoeutectic Modification of Al2O3-ZrO2 Ceramic

Characterization and mechanical properties of Cf/ZrB2-SiC composites fabricated by a hybrid technique based on slurry impregnation, polymer infiltration and pyrolysis and low-temperature hot pressing

Long-term ablation behavior and mechanisms of 2D-Cf/ZrB2-SiC composites at temperatures up to 2400 °C

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

Ablation behavior of SiC whisker and ZrB2 particle-filled ZrO2 sol-gel composite coating under high-intensity continuous laser irradiation

Direct selective laser sintering of high-entropy carbide ceramics

Alumina–zirconium ceramics synthesis by selective laser sintering/melting

Effect of surface microstructure on the temperature response of ZrB 2 –SiC composites