Abstract:Abstract In this article, a novel 1200 V SiC super-junction (SJ) MOSFET with a partially widened pillar structure is proposed and investigated by using the two-dimensional numerical simulation tool. Based on the SiC SJ MOSFET structure, a partially widened P-region is added at the SJ pillar region to improve the short-circuit (SC) ability. After investigating the position and doping concentration of the widened P-region, an optimal structure is determined. From the simulation results, the SC withstand times ( SCWT ) of the conventional trench MOSFET (CT-MOSFET), the SJ MOSFET, and the proposed structure at 800 V DC bus voltage are 15 μs, 17 μs, and 24 μs, respectively. The SCWT of the proposed structure increased by 60 % and 41.2 % in comparison with that of the other two structures. The main reason for the proposed structure with an enhanced SC capability is related to the effective suppression of saturation current at the high DC bias conditions by using a modulated P-pillar region. Meanwhile, a good Baliga’s FOM ( BV 2 / R on ) also can be achieved in the proposed structure due to the advantage of the SJ structure. In addition, the fabrication technology of the proposed structure is compatible with the standard epitaxy growth method used in the SJ MOSFET. As a result, the SJ structure with this feasible optimization skill presents an effect on improving the SC reliability of the SiC SJ MOSFET without the degeneration of the Baliga’s FOM .

Reliability Improvements in SOI-like MOSFET with ESD and Self-Heating Effect

Experimental Results on Drain and Source on Insulator MOSFETs Fabricated by Local SIMOX Technology

Robustness-Improved ESD Protection Devices with Low Leakage Using Middle Silicon Layer in Double SOI Technology

A Simulation-Based Comparison Between Si and SiC MOSFETs on Single-Event Burnout Susceptibility

Single-event burnout resilient design of 4H-SiC MOSFETs through staircase-like buffer layer

Reliability Issues of SiC MOSFETs: A Technology for High-Temperature Environments

Design and Simulation on Improving the Reliability of Gate Oxide in SiC CDMOSFET

Comparison of the Characteristics of DSOI, SOI and Bulk-Si MOSFETs

Improvement on short-circuit ability of SiC super-junction MOSFET with partially widened pillar structure

Experimental investigation of Quasi-SOI MOSFET for highly scaled devices

Design Optimization and Reliability Evaluation in 1.2 kV SiC Trench MOSFET with Deep P Structure

Enhanced Radiation Hardness in SOI MOSFET with Embedded Tunnel Diode Layer

Drain and Source on Insulator MOSFETs Fabricated by Local SIMOX Technology

1.2-Kv Planar SiC MOSFETs with Improved Short-Circuit Capability by Adding Plasma Spreading Layer

A Two-Dimensional Computer-Aided Design Study of Unclamped Inductive Switching in an Improved 4H-SiC VDMOSFET

Simulation Study of Single-Event Burnout Reliability for 1.7-kV 4H-SiC VDMOSFET

Electrothermal Effects on Hot-Carrier Reliability in SOI MOSFETs—AC Versus Circuit-Speed Random Stress

A Novel SiC Trench MOSFET with Self-Aligned N-Type Ion Implantation Technique

A New Silicon-On-Insulator Structure of Metal-Oxide-Semiconductor Field Effect Transistor to Reduce Self-Heating Effect

Experimental Comparison of a New 1.2 kV 4H-SiC Split-Gate MOSFET with Conventional SiC MOSFETs in Terms of Reliability Robustness

Simulation Study on Single-Event Burnout Reliability of 4H-Sic Trench Gate MOSFET with Combined P-buried Layer