Abstract:Geopolymer is an environmentally friendly material that utilizes industrial solid waste, boasting reduced greenhouse gas emissions and energy consumption. It exhibits superior performance in terms of corrosion resistance and thermal stability compared to ordinary Portland cement (OPC). These excellent properties are crucial for marine engineering construction, offering significant value and application potential in marine engineering materials. In this study, geopolymer was employed as the cementitious material, with marine resources like seawater and coral aggregates sourced from remote island areas effectively utilized, and basalt fiber-reinforced polymer (BFRP) bars were incorporated as reinforcements to develop BFRP bars reinforced geopolymer-based coral aggregate concrete (GPCAC) beams. Laboratory aging procedures were employed to investigate the deterioration patterns and damage mechanisms affecting the flexural behavior of GPCAC beams under seawater immersion and dry-wet cycling conditions, comparing them with cement-based coral aggregate concrete (CAC) beams. The experimental results indicated that both CAC and GPCAC beams under simulated marine environments experienced a reduction in the number of cracks upon damage, but their crack spacing and width increased. Moreover, the flexural stiffness of CAC and GPCAC beams after seawater attacks tended to increase, but this increased stiffness did not translate to a higher loading capacity. Conversely, as the corrosion age increased, the ultimate load and deflection values of both CAC and GPCAC beams decreased to varying extents, with the load-carrying capacity degradation more pronounced in seawater dry-wet cycling environments than in seawater immersion conditions. Compared to CAC beams, GPCAC beams exhibited superior resistance to seawater erosion. Following 12 months of seawater dry-wet cycling, the ultimate loading capacity of CAC beams decreased by 12.2%, while that of GPCAC beams only degraded by 9.5%. Predictions of the flexural capacity of GPCAC beams using equations from existing FRP-reinforced normal aggregate concrete (NAC) specifications indicated slightly higher values than the experimental values, with an error margin of less than 15%. Overall, the formulas for the flexural capacity of NAC beams in existing FRP-reinforced NAC codes remained applicable to CAC and GPCAC beams.

Experimental study on the durability of FRP bars reinforced concrete beams in simulated ocean environment

Long-term Flexural Behavior of Concrete Beams with Hybrid FRP and Steel Reinforcements in Simulated Marine Environment

Durability of BFRP bars and BFRP reinforced seawater sea-sand concrete beams immersed in water and simulated seawater

Long-Term Bond Durability of Fiber-Reinforced Polymer Bars Embedded in Seawater Sea-Sand Concrete under Ocean Environments

The durability of seawater sea-sand concrete beams reinforced with metal bars or non-metal bars in the ocean environment

Evaluation of Deformation for Steel Fiber Concrete Beams with BFRP Tendons Eroded by Seawater under Cyclic Loading

Durability test on the flexural performance of seawater sea-sand concrete beams completely reinforced with FRP bars

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

Durability of concrete members reinforced with steel-FRP composite bars under dry-wet cycles of seawater

Durability of Frp Concrete Bonds and Its Constituent Properties under the Influence of Moisture Conditions

Durability of Coral-Reef-sand Concrete Beams Reinforced with Basalt Fibre-Reinforced Polymer Bars in Seawater

Seismic Degradation Behavior of Steel-Frp Composite Bar Reinforced Concrete Beams in Marine Environment Based on Experimental and Numerical Investigation

Experimental study on flexural capacity of reinforced concrete beams in marine environment

Experimental study on the durability of BFRP bars embedded in concrete

Durability of glass FRP bar‐reinforced seawater–sea sand concrete beams under sustained loading in a subtropical coastal environment

Flexural Durability of BFRP Bars Reinforced Geopolymer-Based Coral Aggregate Concrete Beams Conditioned in Marine Environments

Physicochemical-mechanical simulation of the short- and long-term performance of FRP reinforced concrete beams under marine environments

Durability of CFRP Strengthened RC Beam after Six Years Exposure to Natural Hygrothermal Environment with Sustained Loads

Flexural Behavior of Coral Aggregate Concrete Beams Reinforced with BFRP Bars under Seawater Corrosion Environments

Prediction of Long-Term Performance and Durability of Bfrp Bars under the Combined Effect of Sustained Load and Corrosive Solutions

Durability study of concrete-covered basalt fiber-reinforced polymer (BFRP) bars in marine environment