Abstract:Steel fiber-reinforced concrete (SFRC) beams with fiber-reinforced polymer (FRP) bars are promising new composite structures. To investigate the durability of BFRP-SFRC beams, eleven beams were fabricated and conducted via four-point bending tests under cyclic loading. The experimental variables included BFRP reinforcement ratios, pre-cracked widths and environments (Natural or Seawater erosion). Experiment results revealed that the load–deflection curves of BFRP-SFRC beams showed bilinear growth. With the increase in loading and unloading cycles, the peak load and energy consumption of the tested beams decreased, and the impact of loading and unloading cycles on the flexural performances of the BFRP-SFRC beams enhanced with the increase in displacement. Under the same load, as the pre-crack width increases, the deflection of the BFRP-SFRC beam decreases. The deflection of the beam with a pre-crack width of 0.4 mm was 1.34 times than that of the beam without a pre-crack at the load of 100 kN. What is more, the pre-crack width had a bad effect on the energy consumed by the BFRP-SFRC beams. Compared with no pre-crack beam, the energy consumed by the beams with 0.02, 0.2 and 0.4 mm pre-crack width were decreased by 1.5%, 7.8% and 11.0% at the 18 mm displacement, respectively. Significantly, the effect of sea water erosion on the energy consumption of tested beams with high BFRP reinforcement ratios were smaller than that of tested beams with low BFRP reinforcement ratios. Finally, a calculation model of deformation of BFRP-SFRC beams under seawater erosion environments was proposed based on the effective moment of inertia methods. Compared with the existing calculation methods, this model was better correlated with the experimental results.

Durability of Coral-Reef-sand Concrete Beams Reinforced with Basalt Fibre-Reinforced Polymer Bars in Seawater

Durability of BFRP bars and BFRP reinforced seawater sea-sand concrete beams immersed in water and simulated seawater

Durability of Seawater Sea Sand Concrete Beams Reinforced with Carbon Nanotube-Modified BFRP Bars in a Marine Environment

Long-Term Durability of Basalt- and Glass-Fibre Reinforced Polymer (bfrp/gfrp) Bars in Seawater and Sea Sand Concrete Environment

Evaluation of Deformation for Steel Fiber Concrete Beams with BFRP Tendons Eroded by Seawater under Cyclic Loading

Durability of SFCB Reinforced Low-Alkalinity Seawater Sea Sand Concrete Beams in Marine Environment

The durability of seawater sea-sand concrete beams reinforced with metal bars or non-metal bars in the ocean environment

Experimental study on flexural capacity of reinforced concrete beams in marine environment

Durability of glass FRP bar‐reinforced seawater–sea sand concrete beams under sustained loading in a subtropical coastal environment

Performance Improvement of a Fiber-Reinforced Polymer Bar for a Reinforced Sea Sand and Seawater Concrete Beam in the Serviceability Limit State

Experimental Investigation on the Bond Performance of Sea Sand Coral Concrete with FRP Bar Reinforcement for Marine Environments

Shear behaviour of seawater sea-sand coral aggregate concrete beams reinforced with FRP strip stirrups

Durability Study On Interlaminar Shear Behaviour Of Basalt-, Glass- And Carbon-Fibre Reinforced Polymer (B/G/Cfrp) Bars In Seawater Sea Sand Concrete Environment

Flexural Performance Study of Basalt-Fiber-Reinforced Polymer Bar Basalt-Fiber-Reinforced Concrete Beams

Durability study of concrete-covered basalt fiber-reinforced polymer (BFRP) bars in marine environment

GFRP bar-reinforced seawater sea-sand concrete beam under the combined influence of seawater exposure and sustained load: Durability and degradation mechanism

Bond behavior between basalt fiber‐reinforced polymer rebars and coral‐reef‐sand concrete conditioned in saline solution

Bond Performance between Fiber-Wrapped Ribbed Basalt Fiber-Reinforced Polymer Bars and Seawater Sea-Sand Concrete

Bearing capacity of seawater sea sand recycled aggregate concrete beams reinforced with glass fiber reinforced polymer bars

Fatigue performance of basalt fibre-reinforced polymer bar-reinforced sea sand concrete slabs

Bond Durability of BFRP Bars Embedded in Concrete under Seawater Conditions and the Long-Term Bond Strength Prediction