Abstract:Structures made of fiber-reinforced polymer (FRP) bars encased in seawater and sea-sand concrete (SSC) have received significant attention in recent years owing to the high corrosion resistance of FRP, and the environmental friendliness and economic advantage of SSC. However, studies on their long-term bonding performance, particularly in cold coastal environments, are limited. This study investigates the feasibility of using polyvinyl alcohol (PVA) fibers to improve the resistance of normal-strength SSCs to seawater freeze-thaw cycles (FTCs). The interlaminar shear, flexural, and tensile properties of bare glass-FRP (GFRP) and basalt-FRP (BFRP) bars and their bond behaviors in the designed SSC with good seawater freeze-thaw durability were studied. The failure modes and microstructural tests revealed a bonding-deterioration mechanism. The test results revealed that the chloride ions in seawater, SSC-encased alkalinity, and FTCs adversely affected the mechanical properties of the saturated GFRP and BFRP bars. Additionally, the effect of FTCs was greater than that of SSC alkalinity. The deterioration of the BFRP was marginally more severe than that of the GFRP because the corrosion at the basalt fiber-resin interface caused interface and resin cracking, and thereby increased ice expansion during freezing. Seawater FTCs reduced the bond strength and residual bond strength, and increased the corresponding slippages of the SSCs with GFRP and BFRP bars. This is attributed to the degraded resin-rich surface layer of the bar and radial cracking of the cement matrix at the bonding interface. The radial cracking was caused by the hoop and radial stresses generated by the radial expansion of the saturated bar during freezing. These exceeded the tensile strength of the deteriorated concrete after seawater FTCs. The bond degradation of the BFRP-SSC was marginally more severe than that of the GFRP-SSC owing to the larger extent of cracking in the bar and cement matrix.

Durability of BFRP bars and BFRP reinforced seawater sea-sand concrete beams immersed in water and simulated seawater

Durability of FRP bars and FRP bar reinforced seawater sea sand concrete structures in marine environments

Long-Term Durability of Basalt- and Glass-Fibre Reinforced Polymer (bfrp/gfrp) Bars in Seawater and Sea Sand Concrete Environment

Durability of Coral-Reef-sand Concrete Beams Reinforced with Basalt Fibre-Reinforced Polymer Bars in Seawater

Durability of glass FRP bar‐reinforced seawater–sea sand concrete beams under sustained loading in a subtropical coastal environment

Durability of Basalt Fibers, Glass Fibers, and Their Reinforced Polymer Composites in Artificial Seawater

Long-Term Bond Durability of Fiber-Reinforced Polymer Bars Embedded in Seawater Sea-Sand Concrete under Ocean Environments

Experimental study on the durability of FRP bars reinforced concrete beams in simulated ocean environment

Bond Durability of GFRP and BFRP Bars Embedded in PVA Fiber-Reinforced Seawater and Sea-Sand Concrete under Seawater Freeze-Thaw Cycles

Durability study of concrete-covered basalt fiber-reinforced polymer (BFRP) bars in marine environment

Influence of seawater sea sand concrete environment on the long‐term tensile properties of pultruded basalt and basalt‐carbon‐hybrid fiber reinforced polymer profiles

Durability of Seawater Sea Sand Concrete Beams Reinforced with Carbon Nanotube-Modified BFRP Bars in a Marine Environment

GFRP bar-reinforced seawater sea-sand concrete beam under the combined influence of seawater exposure and sustained load: Durability and degradation mechanism

Bond Durability of BFRP Bars Embedded in Concrete under Seawater Conditions and the Long-Term Bond Strength Prediction

Durability Study On Interlaminar Shear Behaviour Of Basalt-, Glass- And Carbon-Fibre Reinforced Polymer (B/G/Cfrp) Bars In Seawater Sea Sand Concrete Environment

The durability of seawater sea-sand concrete beams reinforced with metal bars or non-metal bars in the ocean environment

Durability test on the flexural performance of seawater sea-sand concrete beams completely reinforced with FRP bars

A review on durability of fiber reinforced polymer (FRP) bars reinforced seawater sea sand concrete

Shear behavior of seawater sea-sand concrete beams reinforced with BFRP bars after seawater dry-wet cycling

Durability of carbon/basalt hybrid fiber reinforced polymer bars immersed in alkaline solution

Bond behavior of basalt fiber reinforced polymer bars in seawater sea-sand concrete exposed to daily temperature variations