Abstract:Protecting coastal regions is crucial due to high population density and significant economic value. While numerous strategies have been proposed to mitigate scouring and protect coastal structures, existing techniques have limitations. This paper introduces a novel approach, SEAHIVE®, which enhances the performance of engineered structures by utilizing hexagonal, hollow, and perforated concrete elements externally reinforced with glass fiber-reinforced polymer (GFRP). Unlike conventional steel bars, GFRP offers superior durability and requires less maintenance, making it a sustainable solution for any riverine and coastal environment. SEAHIVE® aims to provide robust structural capacity, effective energy dissipation, and preservation of natural habitats. Although some research has addressed energy dissipation and performance in riverine and coastal contexts, the structural performance of SEAHIVE® elements has not been extensively studied. This paper evaluates SEAHIVE® elements reinforced with externally bonded GFRP longitudinal strips and pretensioned GFRP transverse wraps. Testing full-size specimens under compression and flexure revealed that failure occurred when the pretensioned GFRP wraps failed in compression tests and when longitudinal GFRP strips slipped in flexure tests. Strength capacity was notably improved by anchoring the GFRP strips at both ends. These findings underscore the potential of the SEAHIVE® system to significantly enhance the durability and performance of coastal and riverine protection structures. FEM simulations provided critical insights into the failure mechanism and validated the experimental findings. In fact, by comparing FEM model results for cases before and after applying GFRP wraps under the same compression load, it was found that maximum stresses at crack locations were significantly reduced due to compression forces resulting from the presence of pretensioned GFRP wraps. Similarly, FEM model analysis on flexure samples showed that the most vulnerable regions corresponded to the locations where cracks started during testing.

Durability of glass FRP bar‐reinforced seawater–sea sand concrete beams under sustained loading in a subtropical coastal environment

GFRP bar-reinforced seawater sea-sand concrete beam under the combined influence of seawater exposure and sustained load: Durability and degradation mechanism

Durability of BFRP bars and BFRP reinforced seawater sea-sand concrete beams immersed in water and simulated seawater

Experimental Study of the Flexural Performance of GFRP-Reinforced Seawater Sea Sand Concrete Beams with Built-In GFRP Tubes

Tensile behavior and durability prediction of GFRP-steel composite bars under chloride environments

Durability and microstructure degradation mechanism of FRP-seawater seasand concrete structures: A review

Durability of CFRP-confined seawater sea-sand concrete (SSC) columns under wet-dry cycles in seawater environment

Bond strength of GFRP bars to high strength and ultra-high strength fiber reinforced seawater sea-sand concrete (SSC)

The durability of seawater sea-sand concrete beams reinforced with metal bars or non-metal bars in the ocean environment

Bond durability and degradation mechanism of GFRP bars in seawater sea-sand concrete under the coupling effect of seawater immersion and sustained load

Performance Improvement of a Fiber-Reinforced Polymer Bar for a Reinforced Sea Sand and Seawater Concrete Beam in the Serviceability Limit State

Review of the Properties of Fiber-Reinforced Polymer-Reinforced Seawater–Sea Sand Concrete

Durability of GFRP and CFRP Bars in the Pore Solution of Calcium Sulfoaluminate Cement Concrete Made with Fresh or Seawater

Influence of seawater sea sand concrete environment on the long‐term tensile properties of pultruded basalt and basalt‐carbon‐hybrid fiber reinforced polymer profiles

Physicochemical-mechanical simulation of the short- and long-term performance of FRP reinforced concrete beams under marine environments

Shear performance degradation of basalt fiber‐reinforced polymer bars in seawater environments: Coupled effects of seawater sea‐sand geopolymer mortar coatings and sustained loading

Durability of Seawater Sea Sand Concrete Beams Reinforced with Carbon Nanotube-Modified BFRP Bars in a Marine Environment

Study on the durability of compression behavior for glass fiber‐reinforced polypropylene thermoplastic composite bars in various aging environments

Axial compression behaviour of seawater sea sand concrete columns reinforced with hybrid FRP-stainless steel bars

Effect of Rebar Harsh Storage Conditions on the Flexural Behavior of Glass FRP Concrete

Structural Performance of GFRP-Wrapped Concrete Elements: Sustainable Solution for Coastal Protection