Abstract:Basalt fiber, a kind of natural fiber produced from the melt of basalt stones, has been regarded as a promising material in the manufacture of fiber reinforced composites considering the balance between mechanical properties and environmental costs compared with other nonrenewable/petroleum materials. Moreover, the basalt fiber reinforced polmyers (BFRP) are capable to fabricate the energy harvesting devices in marine engineering when piezoelectric nanocomposites and piezoelectric polymer matrix are adopted to collect offshore renewable energy. However, the long-term performance of BFRP in concrete alkaline and seawater environment has not been comprehensively understood yet, and the lack of knowledge on the performance of BFRP reinforcement under coupled alkalinity and freeze-thaw cycles prevents further application of composite structure in the frigid areas. To address above questions, experimental investigations were carried out with respect to the mechanical properties and deterioration mechanism of BFRP under alkaline environment affected by seawater and temperature as well as under coupled alkaline and freeze-thaw cycles. The results showed that the strength retention of BFRP bars in seawater-sea sand concrete and immersed in seawater is higher than that in distilled water. As the erosion time increases and the temperature rises, severe resin damage occurs inside BFRP bars, and the weakening of connections between fibers and matrix becomes critical in the reduction of tensile performance. Moreover, it is found that the long-term performance of BFRP under coupled alkaline and freeze-thaw cycles is affected by deterioration of resin at the surface, while the majority of internal fibers are free from attack by corrosive agents. These findings will provide a scientific basis for the reliable performance evaluation and further development of high performance and durable multifunctional BFRP materials in marine engineering.

Experimental study on the durability of BFRP bars embedded in concrete

Durability study of concrete-covered basalt fiber-reinforced polymer (BFRP) bars in marine environment

Evaluation of the Long-Term Performance and Durability of Basalt Fiber Reinforced Polymer Bars in Concrete Structures

Degradation of Basalt Frp Bars in Alkaline Environment

Prediction of Long-Term Performance and Durability of Bfrp Bars under the Combined Effect of Sustained Load and Corrosive Solutions

Bond Durability of BFRP Bars Embedded in Concrete under Seawater Conditions and the Long-Term Bond Strength Prediction

Long-Term Durability of Basalt- and Glass-Fibre Reinforced Polymer (bfrp/gfrp) Bars in Seawater and Sea Sand Concrete Environment

Long-term Performance of Basalt Fiber Reinforced Composite under Coupled Effects of Alkalinity and Freeze-Thaw Cycles

Prediction of Long-Term Durability of Unidirectional/multidirectional Basalt Fiber- and Hybrid Fiber-Reinforced Polymer Profiles under Concrete Environment

Study on the Durability of GFRP Bars and Carbon/glass Hybrid Fiber Reinforced Polymer (HFRP) Bars Aged in Alkaline Solution

Durability of BFRP bars and BFRP reinforced seawater sea-sand concrete beams immersed in water and simulated seawater

Durability of Frp Concrete Bonds and Its Constituent Properties under the Influence of Moisture Conditions

Long-Term Bond Durability of Fiber-Reinforced Polymer Bars Embedded in Seawater Sea-Sand Concrete under Ocean Environments

Durability of Basalt Fiber-Reinforced Polymer Bars in Wet-Dry Cycles Alkali-Salt Corrosion

EXPERIMENTAL STUDY ON CORROSION RESISTANT PERFORMANCE OF FRP BARS UNDER ACCELERATED AGING ENVIRONMENTS

Durability of carbon/basalt hybrid fiber reinforced polymer bars immersed in alkaline solution

Degradation factors and microstructure degradation characteristics of B/GFRP bars in harsh environment: A review

Environmental Impact on the Durability of FRP Reinforcing Bars

DURABILITY STUDY OF BASALT FIBER AND ITS FRP BARS

Experimental study on the durability of FRP bars reinforced concrete beams in simulated ocean environment

Advances in durability of FRP bars under alkaline environment