Abstract:The corrosion resistance of FRP-reinforced ordinary concrete members under the combined action of harsh environments (i.e., alkaline or acidic solutions, salt solutions) and freeze-thaw cycles is still unclear. To study the mechanical and apparent deterioration of carbon/basalt/glass/aramid fiber cloth reinforced concrete under chemical and freeze-thaw coupling. Plain concrete blocks and FRP-bonded concrete blocks were fabricated. The tensile properties of the FRP sheet and epoxy resin sheet before and after chemical freezing, the compressive strength of the FRP reinforced test block, and the bending capacity of the prismatic test block pasted with FRP on the prefabricated crack side were tested. The deterioration mechanism of the test block was analyzed through the change of surface photos. Based on the experimental data, the Lam-Teng constitutive model of concrete reinforced by alkali-freeze coupling FRP is modified. The results indicate that, in terms of apparent properties, with the increase in the duration of chemical freeze-thaw erosion, the surface of epoxy resin sheets exhibits an increase in pores, along with the emergence of small cracks and wrinkles. The texture of FRP sheets becomes blurred, and cracks and wrinkles appear on the surface. In terms of failure modes, as the number of chemical coupling erosion cycles increases, the location of failure in epoxy resin sheets becomes uncertain, and the failure plane tilts towards the direction of the applied load. The failure mode of FRP sheets remains unchanged. However, the bonding strength between FRP sheets and concrete decreases, resulting in a weakened reinforcement effect. In terms of mechanical properties, FRP sheets undergo the most severe degradation in the coupled environment of acid freeze-thaw cycles. Among them, GFRP experiences the largest degradation in tensile strength, reaching up to 30.17%. In terms of tensile performance, the sheets rank from highest to lowest as follows: CFRP, BFRP, AFRP, and GFRP.As the duration of chemical freeze-coupled erosion increases, the loss rate of compressive strength for specimens bonded with CFRP is the smallest (9.62% in salt freeze-thaw environment), while the loss rate of bearing capacity is higher for specimens reinforced with GFRP (33.8% in acid freeze-thaw environment). In contrast, the loss rate of bearing capacity is lower for specimens reinforced with CFRP (13.6% in salt freeze-thaw environment), but still higher for specimens reinforced with GFRP (25.8% in acid freeze-thaw environment).

Long-term Performance of Basalt Fiber Reinforced Composite under Coupled Effects of Alkalinity and Freeze-Thaw Cycles

Durability study of concrete-covered basalt fiber-reinforced polymer (BFRP) bars in marine environment

Durability of Basalt Fiber-Reinforced Polymer Bars in Wet-Dry Cycles Alkali-Salt Corrosion

Long-Term Durability of Basalt Fiber-Reinforced Polymer (BFRP) Sheets and the Epoxy Resin Matrix under a Wet–Dry Cyclic Condition in a Chloride-Containing Environment

Experimental study on the durability of BFRP bars embedded in concrete

Evaluation of the Long-Term Performance and Durability of Basalt Fiber Reinforced Polymer Bars in Concrete Structures

Durability of Basalt Fibers, Glass Fibers, and Their Reinforced Polymer Composites in Artificial Seawater

Hygrothermal ageing of basalt fiber reinforced epoxy composites

Durability of BFRP bars and BFRP reinforced seawater sea-sand concrete beams immersed in water and simulated seawater

Durability of carbon/basalt hybrid fiber reinforced polymer bars immersed in alkaline solution

Long-Term Durability of Basalt- and Glass-Fibre Reinforced Polymer (bfrp/gfrp) Bars in Seawater and Sea Sand Concrete Environment

Influence of seawater sea sand concrete environment on the long‐term tensile properties of pultruded basalt and basalt‐carbon‐hybrid fiber reinforced polymer profiles

Degradation of Basalt Frp Bars in Alkaline Environment

Prediction of Long-Term Performance and Durability of Bfrp Bars under the Combined Effect of Sustained Load and Corrosive Solutions

EXPERIMENTAL INVESTIGATION ON DURABILITY OF BASALT FIBER REINFORCED POLYMER UNDER FREEZE-THAW CYCLE AND SODIUM CHLORIDE SOLUTION

Prediction of Long-Term Durability of Unidirectional/multidirectional Basalt Fiber- and Hybrid Fiber-Reinforced Polymer Profiles under Concrete Environment

Chemical Durability and Mechanical Properties of Alkali-proof Basalt Fiber and Its Reinforced Epoxy Composites

Corrosion Characteristics of Basalt-Polypropylene Hybrid Fiber Concrete under the Compound Salt and Drying-Wetting Cycles

Investigation on damage evolution mechanism of various FRP strengthened concrete subjected to chemical-freeze-thaw coupling erosion

DURABILITY STUDY OF BASALT FIBER AND ITS FRP BARS

Durability of FRP bars and FRP bar reinforced seawater sea sand concrete structures in marine environments