Abstract:Ultra-short pulse laser interaction with diamond materials has attracted extensive interest in micro- and nano-machining, especially for the fabrication of micro tools, because of the straightforward method and high precision. Thanks to the development of chemical vapor deposition (CVD) technology, high-quality CVD diamonds are employed in more varieties of tools as performance-enhancing coatings. The purpose of the experiments reported here was to explore the machinability of CVD diamond coating under the irradiation of femtosecond (fs) pulsed laser. The factor-control approach was adopted to investigate the influence of scanning speed, single pulse energy and repetition rate on the surface quality and carbon phase transition of CVD diamond coating. The material removal rate and surface roughness were evaluated. The interaction mechanism of scanning speed, single pulse energy, and repetition rate were discussed, and the fs laser ablation threshold of CVD diamond coating was calculated. It was demonstrated that two ablation mechanisms (weak and intensive) were in existence as evidenced by the distinct surface morphologies induced under different processing conditions. A strong dependence on the variation of scanning speed and pulse energy is identified in the examination of surface roughness and removal rate. Lorentzian–Gaussian deconvolution of Raman spectra illustrates that fs laser irradiation yields a strong modification effect on the coating and release the compressive stress in it. Furthermore, a newly defined parameter referring to the fs laser energies applied to unit volume was introduced to depict the degree of ablation and the Taguchi method was used to figure out the significance of different parameters. The ablation threshold of CVD diamond coating at the effective pulses of 90 is calculated to be 0.138 J/cm2.

Micro-channels Machining on Polycrystalline Diamond by Nanosecond Laser

Analysis of the machining performance and surface integrity in laser milling of polycrystalline diamonds

Assessment Machining of Micro-Channel Textures on PCD by Laser-Induced Plasma and Ultra-Short Pulsed Laser Ablation

Study On Micromachining Of Polycrystalline Diamond By Uv Nanosecond Laser

Laser Machining Micro-Structures on Diamond Surface with a Sub-Nanosecond Pulsed Laser

Ablation Threshold Measurement and Chemical Modification of UV Nanosecond Laser Micromachining of Polycrystalline Diamond

Ultrashort Pulsed Laser Micromachining of Polycrystalline Diamond

Optimization of the Femtosecond Laser Machining Process for Single Crystal Diamond Using Response Surface Methodology

Cryogenic assisted femtosecond laser ablation of polycrystalline diamond

Process Research on Micro-Machining Diamond Microgroove by Femtosecond Laser

Surface microstructuring of single crystalline diamond based on the accumulated energy homogenization in the nanosecond pulsed laser ablation

EXPERIMENTAL INVESTIGATION OF THE SURFACE TOPOGRAPHY IN TERMS OF PROCESS PARAMETERS DURING PICOSECOND LASER MACHINING OF POLYCRYSTALLINE DIAMOND

Fabrication of polycrystalline diamond micro-milling cutter with different grain sizes by picosecond laser

Study on Femtosecond Laser Processing Characteristics of Nano-Crystalline CVD Diamond Coating

Laser processing characteristics of PCD tool and modeling analysis

Fabrication of PCD Skiving Cutter by UV Nanosecond Laser

Nanosecond-Fiber Laser Cutting and Finishing Process for Manufacturing Polycrystalline Diamond-Cutting Tool Blanks

Precision Machining of Single Crystal Diamond Cutting Tool Via Picosecond Laser Irradiation

Surface modeling and component analysis of picosecond laser ablation of CVD diamond

A STUDY OF FEMTOSECOND LASER POLISHING OF CVD NANOPOLYCRYSTALLINE DIAMOND FILMS

Technological study on laser cutting of polycrystalline diamond compact