Abstract:Ultra-short pulse laser interaction with diamond materials has attracted extensive interest in micro- and nano-machining, especially for the fabrication of micro tools, because of the straightforward method and high precision. Thanks to the development of chemical vapor deposition (CVD) technology, high-quality CVD diamonds are employed in more varieties of tools as performance-enhancing coatings. The purpose of the experiments reported here was to explore the machinability of CVD diamond coating under the irradiation of femtosecond (fs) pulsed laser. The factor-control approach was adopted to investigate the influence of scanning speed, single pulse energy and repetition rate on the surface quality and carbon phase transition of CVD diamond coating. The material removal rate and surface roughness were evaluated. The interaction mechanism of scanning speed, single pulse energy, and repetition rate were discussed, and the fs laser ablation threshold of CVD diamond coating was calculated. It was demonstrated that two ablation mechanisms (weak and intensive) were in existence as evidenced by the distinct surface morphologies induced under different processing conditions. A strong dependence on the variation of scanning speed and pulse energy is identified in the examination of surface roughness and removal rate. Lorentzian–Gaussian deconvolution of Raman spectra illustrates that fs laser irradiation yields a strong modification effect on the coating and release the compressive stress in it. Furthermore, a newly defined parameter referring to the fs laser energies applied to unit volume was introduced to depict the degree of ablation and the Taguchi method was used to figure out the significance of different parameters. The ablation threshold of CVD diamond coating at the effective pulses of 90 is calculated to be 0.138 J/cm2.

Ablation Threshold Measurement and Chemical Modification of UV Nanosecond Laser Micromachining of Polycrystalline Diamond

Study On Micromachining Of Polycrystalline Diamond By Uv Nanosecond Laser

Cryogenic assisted femtosecond laser ablation of polycrystalline diamond

Fabrication of PCD Skiving Cutter by UV Nanosecond Laser

Study on Femtosecond Laser Processing Characteristics of Nano-Crystalline CVD Diamond Coating

The fabrication of polycrystalline diamond micro drill based on ultrashort pulsed laser

Investigating Anisotropic Effects and Optimizing Parameters in Ultra-Short Pulsed (USP) Laser Machining of Single Crystalline Diamond (SCD)

Research on the mechanism of micromachining of CVD diamond by femtosecond laser

Investigation on the ablation behavior of cemented tungsten carbide by a nanosecond UV laser

Experimental Parametric Investigation of Nanosecond Laser-Induced Surface Graphitization of Nano-Crystalline Diamond

Nanosecond pulsed laser-processing of CVD diamond

The Influence of the Ionization Regime on Femtosecond Laser Beam Machining Mono-Crystalline Diamond

Surface modeling and component analysis of picosecond laser ablation of CVD diamond

Fabrication of polycrystalline diamond micro-milling cutter with different grain sizes by picosecond laser

Surface microstructuring of single crystalline diamond based on the accumulated energy homogenization in the nanosecond pulsed laser ablation

Effects of pulsed laser processing on structural evolution of diamonds - A molecular dynamics and experimental study

Influence of the grain size of CVD diamond on the thermal conductivity, material removal depth and surface roughness in nanosecond laser machining

Ultra-short pulsed laser processing of single crystalline diamonds for tooling applications

The Influence of the Focus Position on Laser Machining and Laser Micro-Structuring Monocrystalline Diamond Surface

Ablation experiment and threshold calculation of titanium alloy irradiated by ultra-fast pulse laser

Growth of highly oriented graphite by ultraviolet nanosecond pulsed laser ablation of monocrystalline diamond