Abstract:Ultra-short pulse laser interaction with diamond materials has attracted extensive interest in micro- and nano-machining, especially for the fabrication of micro tools, because of the straightforward method and high precision. Thanks to the development of chemical vapor deposition (CVD) technology, high-quality CVD diamonds are employed in more varieties of tools as performance-enhancing coatings. The purpose of the experiments reported here was to explore the machinability of CVD diamond coating under the irradiation of femtosecond (fs) pulsed laser. The factor-control approach was adopted to investigate the influence of scanning speed, single pulse energy and repetition rate on the surface quality and carbon phase transition of CVD diamond coating. The material removal rate and surface roughness were evaluated. The interaction mechanism of scanning speed, single pulse energy, and repetition rate were discussed, and the fs laser ablation threshold of CVD diamond coating was calculated. It was demonstrated that two ablation mechanisms (weak and intensive) were in existence as evidenced by the distinct surface morphologies induced under different processing conditions. A strong dependence on the variation of scanning speed and pulse energy is identified in the examination of surface roughness and removal rate. Lorentzian–Gaussian deconvolution of Raman spectra illustrates that fs laser irradiation yields a strong modification effect on the coating and release the compressive stress in it. Furthermore, a newly defined parameter referring to the fs laser energies applied to unit volume was introduced to depict the degree of ablation and the Taguchi method was used to figure out the significance of different parameters. The ablation threshold of CVD diamond coating at the effective pulses of 90 is calculated to be 0.138 J/cm2.

Surface microstructuring of single crystalline diamond based on the accumulated energy homogenization in the nanosecond pulsed laser ablation

The crack propagation and surface formation mechanism of single crystalline diamond by a nanosecond pulsed laser

Laser Machining Micro-Structures on Diamond Surface with a Sub-Nanosecond Pulsed Laser

Analysis of the machining performance and surface integrity in laser milling of polycrystalline diamonds

Study of spray-mist-assisted laser processing of micro-structures on CVD diamond surface

Study on Femtosecond Laser Processing Characteristics of Nano-Crystalline CVD Diamond Coating

Investigating Anisotropic Effects and Optimizing Parameters in Ultra-Short Pulsed (USP) Laser Machining of Single Crystalline Diamond (SCD)

The Influence of the Focus Position on Laser Machining and Laser Micro-Structuring Monocrystalline Diamond Surface

Micro-channels Machining on Polycrystalline Diamond by Nanosecond Laser

Experimental Parametric Investigation of Nanosecond Laser-Induced Surface Graphitization of Nano-Crystalline Diamond

Analysis of Femtosecond Laser Surface Patterning on Bulk Single-Crystalline Diamond

Surface modeling and component analysis of picosecond laser ablation of CVD diamond

Precision Machining of Single Crystal Diamond Cutting Tool Via Picosecond Laser Irradiation

Surface Micro-Structuring of Coarse-Grained Diamond Wheels by Nanosecond Pulsed Laser for Improving Grinding Performance

Ultra-short pulsed laser processing of single crystalline diamonds for tooling applications

Study On Micromachining Of Polycrystalline Diamond By Uv Nanosecond Laser

Cryogenic assisted femtosecond laser ablation of polycrystalline diamond

Surface Texturing of CVD Diamond Assisted by Ultrashort Laser Pulses

Microstructure and Chemical Bond Evolution of Diamond-Like Carbon Films Machined by Femtosecond Laser

Modeling of the temperature field in nanosecond pulsed laser ablation of single crystalline diamond

A STUDY OF FEMTOSECOND LASER POLISHING OF CVD NANOPOLYCRYSTALLINE DIAMOND FILMS