Abstract:The high hardness and wear resistance of polycrystalline diamond (PCD) micro tool make it widely used in precision machining of small parts of difficult-to-machine materials. The laser and grinding combined machining is an effective method to fabricate PCD micro tools, but the machining damage is difficult to control, which will reduce the cutting performance and tool life. Therefore, this paper aims to deeply study the damage forms and damage formation mechanisms during the fabrication process of PCD micro end mills, so as to improve the quality of the PCD micro mills. The laser and grinding combined machining experiments of PCD micro end mill are carried out, and the surface morphology characteristics and cutting edge of the mill are observed and analyzed. The influence of process parameters on the fabrication quality of PCD micro mill is investigated. The experimental results show that the high temperature of the laser is the main factor causing damage, which causes the melting and oxidation of the surface material, and further forms micro cracks, pits and oxidized attachments on the PCD mill. In addition, diamond phase transformation and excessive removal of cobalt-rich layer will also lead to graphitization and micro-grooves on the mill surface. For the grinding process, the cutting edge is fractured by the impact of the wheel, resulting in micro notches, micro pits and micro cracks. The intergranular crack expansion of PCD material and cleavage breakage of diamond particles are the main causes of micro cracks and micro pits on the mill surface. In addition, the chips will also scratch the tool surface to produce micro nicks and cause the chips coating on the rake face. The research results are helpful to further understand the damage mechanism of laser and grinding combined machining PCD mill, so as to improve the fabrication quality of micro tools.

Fabrication of polycrystalline diamond micro-milling cutter with different grain sizes by picosecond laser

The fabrication of polycrystalline diamond micro drill based on ultrashort pulsed laser

Experimental Study on Fabrication of CVD Diamond Micro Milling Tool by Picosecond Pulsed Laser

Formation mechanism and controlling technique for fabrication of extremely sharp diamond micro mills

Fabrication of PCD Skiving Cutter by UV Nanosecond Laser

Laser Processing of Coarse Grain Polycrystalline Diamond (PCD) Cutting Tool Inserts using Picosecond Laser Pulses

Machining Damage in the Fabrication of Polycrystalline Diamond Micro End Mill with Laser and Grinding Combined Processing Method

Nanosecond-Fiber Laser Cutting and Finishing Process for Manufacturing Polycrystalline Diamond-Cutting Tool Blanks

Ultrashort Pulsed Laser Micromachining of Polycrystalline Diamond

Structural Design and Fabrication of Polycrystalline Diamond Micro Ball-End Mill

Analysis of the machining performance and surface integrity in laser milling of polycrystalline diamonds

Experimental Research on Deep-And-Narrow Micromilled Grooves Using a Self-Fabricated PCD Micro-Cutter

Cryogenic assisted femtosecond laser ablation of polycrystalline diamond

Micro Milling of Fused Silica Using Picosecond Laser Shaped Single Crystal Diamond Tools

Study On Micromachining Of Polycrystalline Diamond By Uv Nanosecond Laser

Precision Machining of Single Crystal Diamond Cutting Tool Via Picosecond Laser Irradiation

Influence of the grain size of CVD diamond on the thermal conductivity, material removal depth and surface roughness in nanosecond laser machining

Laser micromachining of micro-structures on CVD diamond

Micro-channels Machining on Polycrystalline Diamond by Nanosecond Laser

Laser Micro Machining Of Micro-Structures On Cvd Diamond

Fabrication of High Hardness Microarray Diamond Tools by Femtosecond Laser Ablation