Abstract:The high hardness and wear resistance of polycrystalline diamond (PCD) micro tool make it widely used in precision machining of small parts of difficult-to-machine materials. The laser and grinding combined machining is an effective method to fabricate PCD micro tools, but the machining damage is difficult to control, which will reduce the cutting performance and tool life. Therefore, this paper aims to deeply study the damage forms and damage formation mechanisms during the fabrication process of PCD micro end mills, so as to improve the quality of the PCD micro mills. The laser and grinding combined machining experiments of PCD micro end mill are carried out, and the surface morphology characteristics and cutting edge of the mill are observed and analyzed. The influence of process parameters on the fabrication quality of PCD micro mill is investigated. The experimental results show that the high temperature of the laser is the main factor causing damage, which causes the melting and oxidation of the surface material, and further forms micro cracks, pits and oxidized attachments on the PCD mill. In addition, diamond phase transformation and excessive removal of cobalt-rich layer will also lead to graphitization and micro-grooves on the mill surface. For the grinding process, the cutting edge is fractured by the impact of the wheel, resulting in micro notches, micro pits and micro cracks. The intergranular crack expansion of PCD material and cleavage breakage of diamond particles are the main causes of micro cracks and micro pits on the mill surface. In addition, the chips will also scratch the tool surface to produce micro nicks and cause the chips coating on the rake face. The research results are helpful to further understand the damage mechanism of laser and grinding combined machining PCD mill, so as to improve the fabrication quality of micro tools.

Formation mechanism and controlling technique for fabrication of extremely sharp diamond micro mills

Controllable Diamond Cutting of Structured Surfaces with Subnanometric Height Features on Silicon

Fabrication of polycrystalline diamond micro-milling cutter with different grain sizes by picosecond laser

Structural Design and Fabrication of Polycrystalline Diamond Micro Ball-End Mill

Machining Damage in the Fabrication of Polycrystalline Diamond Micro End Mill with Laser and Grinding Combined Processing Method

Development of Polycrystalline Diamond Micro End Mill for Milling-Grinding Combined Machining of Cemented Carbide

Experimental Research on Deep-And-Narrow Micromilled Grooves Using a Self-Fabricated PCD Micro-Cutter

Analysis of the machining performance and surface integrity in laser milling of polycrystalline diamonds

An experimental investigation on micro-milling of polymethyl methacrylate components with nanometric surface roughness

Precision Grinding of a Microstructured Surface on Hard and Brittle Materials by a Microstructured Coarse-Grained Diamond Grinding Wheel

High Efficiency Precision Grinding of Micro-structured SiC Surface Using Laser Micro-structured Coarse-Grain Diamond Grinding Wheel

The fabrication of polycrystalline diamond micro drill based on ultrashort pulsed laser

Precision Machining of Single Crystal Diamond Cutting Tool Via Picosecond Laser Irradiation

Design and development of PCD micro straight edge end mills for micro/nano machining of hard and brittle materials

Study on Laser-Assisted Dry Micro-Ground Surface of Difficult-to-cut Materials

Laser Machining Micro-Structures on Diamond Surface with a Sub-Nanosecond Pulsed Laser

Fabrication of PCD Skiving Cutter by UV Nanosecond Laser

Ultrashort Pulsed Laser Micromachining of Polycrystalline Diamond

Experiment of WEDM Precision Machining for Polycrystalline Diamond Compact

Influence of the grain size of CVD diamond on the thermal conductivity, material removal depth and surface roughness in nanosecond laser machining

Experimental Study on Fabrication of CVD Diamond Micro Milling Tool by Picosecond Pulsed Laser