Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Characterization of 1.2 Kv SiC Super-Junction SBD Implemented by Trench and Implantation Technique

Design and Fabrication of 1.92 Kv 4H-Sic Super-Junction SBD with Wide-Trench Termination

Experimental Demonstration and Analysis of a 1.35-Kv 0.92-M $\omega \cdot \text {cm}^{2}$ SiC Superjunction Schottky Diode

Design and Experimental Demonstration of 1.35 Kv SiC Super Junction Schottky Diode

Investigations on mesa width design for 4H–SiC trench super junction Schottky diodes

3.3 Kv-Class 4H-Sic Epi-Refilled Super-Junction Diode with Repetitive Surge Current Robustness

Characterization and Analysis of 4H-Sic Super Junction JFETs Fabricated by Sidewall Implantation

3.3 kV 4H-SiC Trench Semi-Superjunction Schottky Diode With Improved ON-State Resistance

Breaking the Theoretical Limit of SiC Unipolar Power Device - a Simulation Study

Performance Analysis of 4H-Sic Super-Junction Devices: Impact of Trench Angle and Improvement with Multi-Epi Structure

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

SiC devices parameters effects on the electrical behaviour of mCascode switch

Investigating the Failure Mechanism of Short-Circuit Tests in 1.2-Kv SiC JBS-Integrated MOSFETs

High Temperature Characterization Of 4h-Sic Normally-On Vertical Jfets With Buried Gate And Buried Field Rings

Investigation of a 4H-SiC Trench MOSFET with Back-Side Super Junction

Fabrication and Characterization of Kilovolt p-Type SiC JBS Diodes With Enhanced Current Capability and Electroluminescence Phenomenon

Development of SiC Superjunction MOSFET: A Review

4H-Sic Super-Junction JFET: Design and Experimental Demonstration

Study on 2000V SiC JBS Diodes

Characteristics and avalanche investigation of SiC VDMOSFETs with enhanced P-Based implantation

Single Pulse Avalanche Robustness and Analysis for 1200-V SiC Junction Barrier Schottky Diode