Abstract:Silicon carbide (SiC) super junction (SJ) JFETs fabricated by sidewall implantation with different mesa-widths (MWs) and termination designs are characterized in this article. The device with an MW of $1.8 \mu \text{m}$ and active area of 0.104 mm2 achieves a breakdown voltage of 1086 V and a specific ON-resistance of 0.98 $\text{m}\Omega \,\cdot $ cm2. The first-quadrant output and transfer characteristics are presented, from which the ON-resistance and pinch-off voltage are extracted and analyzed. The pinch-off voltage shows great stability against the variation of temperature. The forward blocking characteristics under different gate voltages and with different terminations are presented. The gate needs to be negatively biased below the hold-off voltage to prevent the premature breakdown caused by drain-induced barrier-lowering (DIBL) effect. The termination with narrow mesas in the ${x}$ -direction and trapezoidal mesas in the ${y}$ -direction is found to have the highest breakdown voltage, due to its optimized net charge distribution. The third-quadrant output characteristics are presented. Under forward-off gate voltage, the third-quadrant turn-on voltage is found to be determined by the difference of hold-off and pinch-off voltages, and there is a tradeoff between the absolute third-quadrant voltage drop ( $\vert {V}_{\text{on}}\vert $ ) and the maximum current before gate junction turn-on ( ${J}_{\text{umax}}$ ). The third-quadrant performance can be improved by using forward-on gate voltage, a $\vert {V}_{\text{on}}\vert $ lower than 0.2 V (at 100 A/cm2) and a ${J}_{\text{umax}}$ larger than 500 A/cm2 are achieved. Finally, the whole output characteristics are modeled to facilitate the device design in different applications.

Experimental Demonstration and Analysis of a 1.35-Kv 0.92-M $\omega \cdot \text {cm}^{2}$ SiC Superjunction Schottky Diode

Design and Experimental Demonstration of 1.35 Kv SiC Super Junction Schottky Diode

3.3 Kv-Class 4H-Sic Epi-Refilled Super-Junction Diode with Repetitive Surge Current Robustness

Design and Fabrication of 1.92 Kv 4H-Sic Super-Junction SBD with Wide-Trench Termination

Characterization of 1.2 Kv SiC Super-Junction SBD Implemented by Trench and Implantation Technique

3.3 kV 4H-SiC Trench Semi-Superjunction Schottky Diode With Improved ON-State Resistance

4.15 Kv / 4.6 Mω·cm2 4H-Sic Epi-refilled Super-Junction Schottky Diode with Ring Assisted Super-Junction Termination Extension

Fabrication and Application of 1.7KV SiC-Schottky Diodes

1.43 Kv 4H-Sic Lateral Junction Barrier Schottky Diode with High BFOM (390 MW/cm2)

Study on 2000V SiC JBS Diodes

4H-Sic Super-Junction JFET: Design and Experimental Demonstration

1.4 3 Kv 4H-Sic Lateral Junction Barrier Schottky Diode with High BFOM (390 MW/cm2)

Characterization and Analysis of 4H-Sic Super Junction JFETs Fabricated by Sidewall Implantation

Fabrication and Characterization of Kilovolt p-Type SiC JBS Diodes With Enhanced Current Capability and Electroluminescence Phenomenon

Development of 1000v Sic Jbs Diodes

Development of SiC Superjunction MOSFET: A Review

Investigating the Failure Mechanism of Short-Circuit Tests in 1.2-Kv SiC JBS-Integrated MOSFETs

Investigations on mesa width design for 4H–SiC trench super junction Schottky diodes

Design and Experimental Study of 4H-Sic Trenched Junction Barrier Schottky Diodes

Design and Experimental Study of 1.2kV 4H-SiC Merged PiN Schottky Diode

Breaking the Theoretical Limit of SiC Unipolar Power Device - a Simulation Study