Abstract:In this study, a sputtering system was adopted for the preparation of Cu2ZnSnS4 (CZTS) thin films with high material quality. The system precisely controlled the elemental ratio in a copper-zinc-tin (CZT) precursor for contributing to the grain growth of CZTS crystallites, and reduced the detrimental formation of the Cu2-xS secondary phase during the high-temperature sulfurization process. The CZT precursor was prepared in a layer sequence of Zn/Sn/Cu/Zn, as the Cu-capping layer could protect the underlying Zn/Sn bilayer from volatilization during the high-temperature sulfurization. The CZT precursors were subjected to the sulfurization process at varied temperatures ranging from 480 to 560 °C for 20 min to form the CZTS thin film. In this study, the Cu/(Zn + Sn) and Zn/Sn ratios in the CZTS film were studied by energy dispersive X-ray spectroscopy measurements, and both ratios revealed elevations with an increasing sulfurization temperature, owing to the thermal volatilization of Zn and Sn. Thus, the formation of the undesirable Cu2-xS secondary phase was enhanced, and the surface roughness and density of voids on the CZTS thin films were increased. For a reduced Zn/Sn ratio with a reduced sulfurization temperature, the improved CZTS thin-film quality was demonstrated by the increased X-ray diffraction (XRD) and Raman intensity, along with the reduction of the XRD linewidth of the (112) CZTS crystal phase. A CZTS thin film with a sulfurization condition of 500 °C for 20 min showed a low Zn/Sn ratio (at 1.1), along with the features of a dense and smooth thin-film surface. Moreover, a reduced photoluminescence spectra full width at half maximum (FWHM) value of 92.7 meV was observed. In addition, for further improving the grain growth of CZTS, a pre-annealing process of a CZT precursor was conducted at a temperature of 350 °C for 30 min. An enhancement of the CZTS crystallite size with the stoichiometric formation of a CZTS phase and a reduced Cu2-XS phase was observed, indicating the superior material quality of the CZTS thin films.

Investigate the Growth Mechanism of Cu2FeSnS4 Thin Films by Sulfurization of Metallic Precursor

Growth Of Cu2znsns4 Thin Films By Sulfurization Of Co-Sputtered Metallic Precursors

Growth of CuH 2SZnSnSH 4S thin films by sulfurization of co-sputtered metallic precursors

Investigation of the Sulfurization Process of Cu2sns3 Thin Films with Stacked Layers Cbd-Cu/Sns by Rapid Thermal Process

Fabrication of Cu2ZnSnS4 Thin Films Through Sulfurization of Co-Electrodeposited Cu-Zn-Sn Metallic Precursor

Physical Properties of Cu2SnS3 Thin Films Prepared by Sulfurization of Co-Sputtered Cu-Sn Metallic Precursors

Phases formation of Cu2ZnSnS4 thin films by sulfurizing stacked precursors by sputtering from CuZn and CuSn targets

Fabrication and Photoelectric Properties of Cu2FeSnS4(CFTS) and Cu2FeSn(S,Se)4(CFTSSe) Thin Films

Fabrication of highly crystallized Cu 2 SnS 3 thin films through sulfurization of Sn-rich metallic precursors

Synthesis, Growth and Characterization of Cu2CoSnS4 Thin Films via Thermal Evaporation Method

Sulfurization Effect on Optical Properties of Cu2SNS3 Thin Films Grown by Two-Stage Process

Fabrication of Cu 2 ZnSnS 4 absorber layers with adjustable Zn/Sn and Cu/Zn+Sn ratios

Effects of the growth process on surface morphology of Cu2(Sn1−xGex)S3 thin films

FABRICATION AND CHARACTERIZATION OF CuxS THIN FILM BY ELECTRODEPOSITING

Formation of Cu2SnS3 thin film by the heat treatment of electrodeposited SnS–Cu layers

Effect of sulfurization time on the properties of copper zinc tin sulfide thin films grown by electrochemical deposition

Preparation and Characterization of Cu2SnS3 Thin Films by Two Stage Process for Solar Cell Application

CuInS 2 thin films obtained by solid-state sulfurization

Investigation of Zn/Sn ratio for improving the material quality of CZTS thin films with the reduction of Cu2-xS secondary phase

Fabrication of Cu2SnS3 Thin Film Solar Cells Via a Sol-Gel Technique in Air

Electrodeposition of Cu2FeSnS4 thin films for solar cell applications: mechanism of deposition and influence of Fe2+ concentration