Abstract:In this study, the twinning–detwinning behavior and slip behavior of rolled AZ31 magnesium-alloy plates during a three-step intermittent dynamic compression process along the rolling direction (RD) and normal direction (ND), are investigated via quasi-in situ electron backscatter diffraction, and the causes of the twinning and detwinning behavior are explained according to Schmid law, local strain coordination, and slip trajectories. It is found that the twins are first nucleated and grow at a compressive strain of 3% along the RD. In addition to the Schmid factor (SF), the strain coordination factor (m') also influences the selection of the twin variants during the twinning process, resulting in the nucleation of twins with a low SF. During the second and third steps of the application of continuous compressive strains with magnitudes and directions of 3%RD+3%ND and 3%RD+3%ND+2.5%ND, detwinning occurs to different extents. The observation of the detwinning behavior reveals that the order in which multiple twins within the same grain undergo complete detwinning is related to Schmid law and the strain concentration, with a low SF and a high strain concentration promoting complete detwinning. The interaction between slip dislocations and twin boundaries in the deformed grains as well as the pinning of dislocations at the tips of the {101¯2} tensile twins with a special structure result in incomplete detwinning. Understanding the microstructural evolution and twinning behavior of magnesium alloys under different deformation geometries is important for the development of high-strength and high-toughness magnesium alloys.

Investigation of Twinning Process in Magnesium Alloy by Means of Orientation Mapping

EBSD Analysis and Theoretical Prediction of Twin Orientations During Compression in Mg-3Al-1Zn

Influence of Grain Orientation on Twinning During Warm Compression of Wrought Mg–3Al–1Zn

Influence of Twinning-Induced Recrystallization on Texture Evolution in a High Strain Rate Compressed Mg-Zn Alloy

Twinning of AZ31 Magnesium Alloy Analyzed by EBSD Technique

Influence of observation plane on twin variant identification in magnesium via trace and misorientation analysis

Study on twinning behaviors during multi-directional compression for AZ31 magnesium alloy by EBSD

Three-dimensional study of grain scale tensile twinning activity in magnesium: A combination of microstructure characterization and mechanical modeling

Twinning Characterization of Fiber-Textured AZ31B Magnesium Alloy During Tensile Deformation

Quantitative investigation on the {10–12} twinning-detwinning behavior and twinning transfer of an extruded Mg-2.8Y sheet during compression-tension loading via quasi-in-situ EBSD observation

Quasi-in Situ Electron Backscatter Diffraction Analysis of Twinning–detwinning Behavior in AZ31 Magnesium- Alloy Rolled Plates Subjected to Compression Loading in Different Directions

Microtexture Evolution Via Deformation Twinning and Slip During Compression of Magnesium Alloy AZ31

Study of Twin Behavior During Uniaxial Compression of Az31 Magnesium Alloy

Twinning and Twin Intersection in Az31 Mg Alloy During Warm Deformation

The Mechanism of Twinning Activation and Variant Selection in Magnesium Alloys Dominated by Slip Deformation

Twinning Characteristic in Tension of Magnesium Alloys and Its Effect on Mechanical Properties

Twinning Behavior in a Rolled Mg-Al-Zn Alloy under Dynamic Impact Loading

Twinning Effects on the Hot Deformation Behavior of AZ31 Mg Alloy

Quasi-in Situ Observation of Extension Twinning of AZ31 Magnesium Alloy under Co-Directional Dynamic Compression

Twinning, Grain Orientation, and Texture Variations in Mg Alloy Processed by Pre-Rolling

Role of {101‾2} Twinning in the Anisotropy and Asymmetry of AZ31 Magnesium Alloy under High Strain Rate Deformation