Abstract:In this study, the twinning–detwinning behavior and slip behavior of rolled AZ31 magnesium-alloy plates during a three-step intermittent dynamic compression process along the rolling direction (RD) and normal direction (ND), are investigated via quasi-in situ electron backscatter diffraction, and the causes of the twinning and detwinning behavior are explained according to Schmid law, local strain coordination, and slip trajectories. It is found that the twins are first nucleated and grow at a compressive strain of 3% along the RD. In addition to the Schmid factor (SF), the strain coordination factor (m') also influences the selection of the twin variants during the twinning process, resulting in the nucleation of twins with a low SF. During the second and third steps of the application of continuous compressive strains with magnitudes and directions of 3%RD+3%ND and 3%RD+3%ND+2.5%ND, detwinning occurs to different extents. The observation of the detwinning behavior reveals that the order in which multiple twins within the same grain undergo complete detwinning is related to Schmid law and the strain concentration, with a low SF and a high strain concentration promoting complete detwinning. The interaction between slip dislocations and twin boundaries in the deformed grains as well as the pinning of dislocations at the tips of the {101¯2} tensile twins with a special structure result in incomplete detwinning. Understanding the microstructural evolution and twinning behavior of magnesium alloys under different deformation geometries is important for the development of high-strength and high-toughness magnesium alloys.

Twinning Behavior in a Rolled Mg-Al-Zn Alloy under Dynamic Impact Loading

Impact-induced Twinning in a Magnesium Alloy under Different Stress Conditions

Abnormal Twinning Behavior and Constitutive Modeling of a Fine-Grained Extruded Mg–8.0Al–0.1Mn–2.0Ca Alloy under High-Speed Impact along Various Directions

Microstructure Characterization of Twinning Under Impact Loading for AZ31B Magnesium Alloys

A Study of {10-12} Twinning Activity Associated with Stress State in Mg-3Al-1Zn Alloy during Compression

Role of {10–12} Twinning and Detwinning in the Shock-Hardening Behavior of Rolled Mg–3Al–1Zn Alloy

Effect of Deformation Mode on Double-Peak Texture Evolution in Pre-Twinning Mg-3Al-1Zn Alloy During High-Speed Impacting Loading

The Effect of Twins on Mechanical Properties and Microstructural Evolution in AZ31 Magnesium Alloy during High Speed Impact Loading

Effect of twinning on the deformation behavior of an extruded Mg-Zn-Zr alloy during hot compression testing

Quasi-in Situ Electron Backscatter Diffraction Analysis of Twinning–detwinning Behavior in AZ31 Magnesium- Alloy Rolled Plates Subjected to Compression Loading in Different Directions

EBSD Analysis and Theoretical Prediction of Twin Orientations During Compression in Mg-3Al-1Zn

Loading Mode Dependence of {$$10\bar{1}2$$} Twin Variant Selection in a Rolled Mg-Al-Zn Alloy

Strain Rate and Texture Effects on Microstructural Characteristics of Mg-3al-1zn Alloy During Compression

Abnormal Twinning Behavior Induced by Local Stress in Magnesium

Loading Mode Dependence of 101̅2 Twin Variant Selection in a Rolled Mg-Al-Zn Alloy

Twinning and Twin Intersection in Az31 Mg Alloy During Warm Deformation

Twinning Effects on the Hot Deformation Behavior of AZ31 Mg Alloy

Atomic Motion in Mg–3Al–1Zn During Twinning Deformation

Study of Twin Behavior During Uniaxial Compression of Az31 Magnesium Alloy

The Effect of Twin–twin Interaction in Mg 3al 1zn Alloy During Compression

EFFECT OF TWINNING ON MECHANICAL PROPERTY AND WORKABILITY OF Mg ALLOY