Abstract:In the present study, room-temperature compression experiments and characterization experiments via optical microstructure (OM), X-ray diffractometer (XRD) and electron backscattered diffraction (EBSD) techniques were conducted on WE43 magnesium (Mg) alloy samples to investigate the grain size effect on twinning behavior. Three couples of solution treatments (823 K for 0.5 h, 798 K for 8 h, 823 K for 16 h, followed by water-quenching at ⁓333 K) were adopted and these solutionized samples are with different grain sizes of 48.5, 72.0 and 120.2 μm, respectively. Results show that {10–12} extension twin (ET) and {11–21} ET serve as major twinning modes during plastic deformation. For all 7.7%-deformed samples, although the volume fractions of {10–12} ETs and {11–21} ETs increase with the increasing grain size. {10–12} ETs are in growth stage, while {11–21} ETs are mainly in nucleation stage and they still maintain narrow and parallel to each other. Besides, {10–12} ETs mainly contribute to the rotation of c-axes of grains towards compression direction, while {11–21} ETs mainly contribute to the formation of a nearly ring-shaped texture component in (0002) pole figure. Twin variants analysis with the assistance of Schmid factor (SF) demonstrates that the activation of twin variants mainly obeys Schmid law. When only {10–12} ETs occur in individual grains, the maximum number of twin variants shows some positive relationship with the increasing grain size. By comparison, when both {10–12} ETs and {11–21} ETs occur in individual grains, the maximum numbers of twin variants are rarely influenced by the increasing grain size.

Influence of Grain Orientation on Twinning During Warm Compression of Wrought Mg–3Al–1Zn

EBSD Analysis and Theoretical Prediction of Twin Orientations During Compression in Mg-3Al-1Zn

Influence of grain size on twinning behavior of WE43 magnesium alloy during room-temperature compression deformation

Identification and Analysis of Twinning Variants During Compression of a Mg–Al–Zn Alloy

Effect of initial orientation on the microstructure and mechanical properties of textured AZ31 Mg alloy during torsion and annealing

Effect of twinning on the deformation behavior of an extruded Mg-Zn-Zr alloy during hot compression testing

The Influence of Twinning on Plastic Constitutive Description of a Magnesium Alloy

Microtexture Evolution Via Deformation Twinning and Slip During Compression of Magnesium Alloy AZ31

Twinning Effects on the Hot Deformation Behavior of AZ31 Mg Alloy

Effect of crystal orientation on the deformation behavior of the magnesium alloy AZ31 during plane strain compression

The effects of orientation control via tension-compression on microstructural evolution and mechanical behavior of AZ31 Mg alloy sheet

Effects of initial grain size and orientation on the twin behavior in ZK60 Mg alloy

Strain Rate and Texture Effects on Microstructural Characteristics of Mg-3al-1zn Alloy During Compression

Effect of deformation conditions on twinning of AZ31 magnesium alloy during compression test

Twinning, Grain Orientation, and Texture Variations in Mg Alloy Processed by Pre-Rolling

Hot Deformation Behavior and Microstructural Evolution of Twin-Roll-Casting Mg Alloy during High-Temperature Compression

Influence of Local Strain on Twinning Behavior During Compression of AZ31 Magnesium Alloy

Twinning Behavior of a Strongly Basal Textured AZ31 Mg Alloy During Warm Rolling

Effect of Original Orientation on Microtexture Evolution of Az31 Mg Alloy

Twinning and Twin Intersection in Az31 Mg Alloy During Warm Deformation

Effect of Sm on Twinning Behavior of Mg-Gd-Y-Zr Alloy at Room Temperature Compression