Abstract:In-plane uniaxial tension of AZ31 magnesium alloy sheet with non-basal texture has been conducted in order to demonstrate the effects of loading direction on the microstructure evolution and mechanical properties at ambient temperature. Loading axes are chosen to be along five directions distributed between rolling direction (RD) and transverse direction (TD), allowing various activities in involved slip and twinning modes to take place. As for twinning modes, electron backscattered diffraction observations confirm that the contribution of \({{\{ 10\overline{1}1\} }}\) compression twinning is minimal to the plastic deformation of all deformed samples. By comparison, \({{\{ 10\overline{1}2\} }}\) extension twinning (ET) not only serves as an important carrier on sustaining and accommodating plastic strain but also contributes to the emergence of TD-component texture with the progression of plastic strain. In terms of slip modes, analysis on Schmid factor demonstrates that the increasing tilted angle between loading direction and RD of sheet is unfavorable to the activation of basal <a> slip, whereas it contributes to the activation of prismatic <a> slip. These observations consequently explain the increasing tendency of 0.2% proof yield stress. Moreover, the activations of basal <a> slip and \({{\{ 10\overline{1}2\} }}\) ET collectively contribute to the concentration of two tilted basal poles toward normal direction. With increasing angle between loading direction and RD, the activations of basal <a> slip and \({{\{ 10\overline{1}2\} }}\) ET are gradually weakened. This leads to a weakening tendency about concentration of two tilted basal poles, a generally increasing tendency about Lankford value (r-value) and a generally decreasing tendency about strain-hardening exponent (n-value).

The effects of orientation control via tension-compression on microstructural evolution and mechanical behavior of AZ31 Mg alloy sheet

Influence of In-Plane Simple Shear Strain on the Grain Orientation Regulation and Stretch Formability of Pre-twinned AZ31 Magnesium Alloy Sheet

Effect of initial orientation on the microstructure and mechanical properties of textured AZ31 Mg alloy during torsion and annealing

Enhanced Formability of a Magnesium Alloy Sheet Via In-Plane Pre-Strain Paths

Effect of crystal orientation on the deformation behavior of the magnesium alloy AZ31 during plane strain compression

Dependence of Microstructure Evolution and Mechanical Properties on Loading Direction for AZ31 Magnesium Alloy Sheet with Non-basal Texture During In-Plane Uniaxial Tension

Influence of Pre-Hardening on Microstructure Evolution and Mechanical Behavior of AZ31 Magnesium Alloy Sheet

Effect of Original Orientation on Microtexture Evolution of Az31 Mg Alloy

Effect of Induced Screw Twisted Strain on the Twin Orientation Regulation and the Ductility of Pre-Twined ZM21 Mg Alloys

Influence of Grain Orientation on Twinning During Warm Compression of Wrought Mg–3Al–1Zn

Texture control by {10-12} twinning to improve the formability of Mg alloys: A review

Evolution of deformation mechanisms and their orientation dependence in fine-grained Mg-3Gd during tension

Mechanical Properties and Anisotropy of AZ31 Alloy Sheet Processed by Flat Extrusion Container

Microstructure, Texture and Mechanical Properties Evolution of Pre-Twinning Mg Alloys Sheets During Large Strain Hot Rolling

Effect of Crystal Orientation on the Mechanical Properties and Strain Hardening Behavior of Magnesium Alloy Az31 During Uniaxial Compression

Unveiling the planar deformation mechanisms for improved formability in pre-twinned AZ31 Mg alloy sheet at warm temperature

Twinning, Grain Orientation, and Texture Variations in Mg Alloy Processed by Pre-Rolling

Towards enhancing the ductility of AZ31 Mg alloys by controlling twin orientation at various shear strain levels

Effect of texture types on microstructure evolution and mechanical properties of AZ31 magnesium alloy undergoing uniaxial tension deformation at room temperature

Dynamic recrystallization, twinning behaviors and mechanical response of pre-twinned AZ31 Mg alloy sheet along various strain paths at warm temperature

Research on deformation mechanism of AZ31 magnesium alloy during uniaxial compression