Abstract:In-plane uniaxial tension of AZ31 magnesium alloy sheet with non-basal texture has been conducted in order to demonstrate the effects of loading direction on the microstructure evolution and mechanical properties at ambient temperature. Loading axes are chosen to be along five directions distributed between rolling direction (RD) and transverse direction (TD), allowing various activities in involved slip and twinning modes to take place. As for twinning modes, electron backscattered diffraction observations confirm that the contribution of \({{\{ 10\overline{1}1\} }}\) compression twinning is minimal to the plastic deformation of all deformed samples. By comparison, \({{\{ 10\overline{1}2\} }}\) extension twinning (ET) not only serves as an important carrier on sustaining and accommodating plastic strain but also contributes to the emergence of TD-component texture with the progression of plastic strain. In terms of slip modes, analysis on Schmid factor demonstrates that the increasing tilted angle between loading direction and RD of sheet is unfavorable to the activation of basal <a> slip, whereas it contributes to the activation of prismatic <a> slip. These observations consequently explain the increasing tendency of 0.2% proof yield stress. Moreover, the activations of basal <a> slip and \({{\{ 10\overline{1}2\} }}\) ET collectively contribute to the concentration of two tilted basal poles toward normal direction. With increasing angle between loading direction and RD, the activations of basal <a> slip and \({{\{ 10\overline{1}2\} }}\) ET are gradually weakened. This leads to a weakening tendency about concentration of two tilted basal poles, a generally increasing tendency about Lankford value (r-value) and a generally decreasing tendency about strain-hardening exponent (n-value).

Microstructure Evolution and Mechanical Behavior of AZ31 Magnesium Alloy Sheet with Bimodal Texture under Bending Deformation

Microstructure Evolution of AZ31B Magnesium Alloy Sheets Deformed in Different Deformation Directions

Effect of texture types on microstructure evolution and mechanical properties of AZ31 magnesium alloy undergoing uniaxial tension deformation at room temperature

Structure Evolution of Az31 Mg Alloy Sheet During Bidirectional Cyclic Bending at Low Temperature and Subsequent Annealing

Microstructural and Textural Evolution of Az61 Magnesium Alloy Sheet During Bidirectional Cyclic Bending

Dependence of Microstructure Evolution and Mechanical Properties on Loading Direction for AZ31 Magnesium Alloy Sheet with Non-basal Texture During In-Plane Uniaxial Tension

Enhancement of Tensile Ductility and Stretch Formability of AZ31 Magnesium Alloy Sheet Processed by Cross-Wavy Bending

Research on Deformation Mechanism of AZ31 Magnesium Alloy Sheet with Non-Basal Texture During Uniaxial Tension at Room Temperature: A Visco-Plastic Self-Consistent Analysis

Tensile Properties and Microstructure of AZ31B Magnesium Alloy Sheet Processed by Repeated Unidirectional Bending

Microstructure and Formability Evolutions of AZ31 Magnesium Alloy Sheets Undergoing Continuous Bending Process

In-situ investigation on the microstructure evolution and plasticity of two magnesium alloys during three-point bending

Microtexture Evolution Via Deformation Twinning and Slip During Compression of Magnesium Alloy AZ31

Microstructure and Texture Evolution of AZ31 Magnesium Alloy Thin Sheet Processed by Hot‐Rolling–Shearing–Bending

Mechanical responses and deformation mechanisms in the AZ31 magnesium alloy during cyclic bending

Effects of Bimodal Basal Texture on Bending Stress and Microstructure Evolution of Mg-2.6Nd-0.55Zn-0.5Zr Alloys

Mechanical Properties and Microstructure Evolution of AZ31 Magnesium Alloy Sheet Subjected to High Strain Rates Loading of Different Orientations

Texture Weakening of AZ31 Magnesium Alloy Sheet Obtained by a Combination of Bidirectional Cyclic Bending at Low Temperature and Static Recrystallization

Effect of Initial Texture on the Bending Behavior, Microstructure and Texture Evolution of ZK60 Magnesium Alloy During the Bending Process

Mechanical Properties and Anisotropy of AZ31 Alloy Sheet Processed by Flat Extrusion Container

Mechanical Behavior and Microstructure Evolution of a Rolled Magnesium Alloy AZ31B under Low Stress Triaxiality

Asymmetry in the hot deformation behavior of AZ31B magnesium sheets