Abstract:W – Cu ultrafine/nanocomposite powders have high sintering activity, so ultrafine/nanotechnology of W – Cu composite powders is one of the main methods to obtain fully dense, high-performance W – Cu composite materials. Cu -coated ultrafine W composite powders were synthesized by ultrasonic-assisted electroless plating process with non-noble metal activation pretreatment at room temperature in this paper. The growth mechanism of Cu layers and surface morphologies and composition of initial ultrafine W powders, pretreated W powders and Cu -coated W powders were analyzed by field emission scanning electron microscopy (FE-SEM), and energy dispersion spectrometry (EDS). The results show that the uniformly Cu coated W composite powder is successfully synthesized without conventional sensitization and activation steps by ultrasonic-assisted electroless plating at room temperature. The Cu layers on the ultrafine W powders had cell structure with dense, uniform distribution. The growth mechanism of Cu layers appears as follows: the surfaces of pretreated W powders appear linear-like and lamellar-like surface defects which act as activated sites. The reactants in the plating solution were adsorbed on catalytic activity surfaces of powders and happened oxidation–reduction reaction. The growth and aggregation mechanisms of Cu particles after nucleation are stripy Cu -cells grew up, bend, bifurcated, and aggregated, then wounding into a cellular structure, like "wrapping wool clusters" in the life. Finally, Cu cells grow up and merge into a layer.

Electroless Co-P Alloy Plating of Superfine Si3N4 Powders

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Lead-tin alloy electroplating applied to superconducting resonator

Co–Al2O3 nanocomposites powder prepared by electroless plating

Sintering Densification of Cu/Al2O3p Nano-Composite Powders by Electroless Copper Plating

Preparation of Ni-Coated SiC Ceramic Composite Powder by Electroless Plating

Sintering of the ultrafine Ag-SnO2 powders prepared by electroless silver plating

Preparation and Characteristics of New Type Nanocomposite Powder

Preparation of Ag-Al2O3 nano-composites powder

Effect of the impurity in electroless plated Powders on morphology and properties of sintered AgSnO2 materials

PREPARATION OF ULTRAFINE W–Cu COMPOSITE POWDER USING ULTRASONIC-ASSISTED ELECTROLESS PLATING

Preparation and Characterization of Ni-Coated Cr3c2 Powder by Room Temperature Ultrasonic-Assisted Electroless Plating

Electroless acid-based plating Cu on TiNi/Ti/SiO2/Si substrate

Influencing factors on the uniformity of copper coated nano-Al2O3 powders prepared by electroless plating

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

Ni-Ce-P Electroless Plating and Properties of the Coating on 27simn Steel

Studies of electroless Ni–Co–P ternary alloy on glass fibers

A Specific Chemical Activation Pretreatment for Electroless Nickel Plating on SiC Ceramic Powders

Enhanced Mechanical and Tribological Capabilities of a Silicon Aluminum Alloy with an Electroplated Ni–Co–P/Si3N4 Composite Coating

Influence of Electrodeposition Process Parameters and Si3N4 Nanoparticle Concentration on Microhardness and Wettability of Ni-Co-Si3N4 Nanocomposite Coatings

A facile fabrication of Ag/SiC composite coating with high mechanical properties and corrosion resistance by electroless plating