Abstract:This paper presents the influence of Aluminum Nitride (AlN) nanoparticles on the electrical and material properties of epoxy resin (EP). The EP/AlN nanocomposites with different concentrations of nano-AlN fillers are prepared. The dispersion of the nano-AlN particles in the composites is analyzed by a field emission scanning electron microscope (FESEM). The electrical properties are investigated by the space charge and DC conductivity measurements, whereas the material properties are studied by Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), respectively. The results show that the homo-charge accumulation appears near both electrodes during the polarization, but there are limited negative charges left near both electrodes in the depolarization for the pure EP sample. There is no space charge accumulation in the 1 wt% and 2 wt% EP/AlN nanocomposites. The electric field distortion of the pure EP sample is 20%. Moreover, the electric field distortion initially decreases with the increase of the nano-AlN content, but it increases for the 2 wt% nano-AlN sample. Temperature has a dominant influence on the DC conductivity of the EP/AlN nanocomposites comparing to the pure EP. However, the DC conductivity of the nanocomposites becomes stable at high temperatures. It is also found that the weight loss of the samples decreases with the addition of the nano-AlN and the 1 wt% nano-AlN sample has the highest glass transition temperature. It is elucidated that the high apparent mobility and activation energy facilitate the space charge transport and suppressing the space charge accumulation. Furthermore, the nano-AlN filler can increase the trap level and trap energy density of the deep traps in the sample. The dielectric loss of the EP at high frequency is reduced with the content of 1 wt% nano-AlN. Furthermore, the addition of the nano-AlN can improve the thermal stability of the EP. The 1 wt% nano-AlN sample has the superior electrical insulation and material performance amongst the tested materials.

Preparation and Characteristics of New Type Nanocomposite Powder

Co–Al2O3 nanocomposites powder prepared by electroless plating

Preparation of Ag-Al2O3 nano-composites powder

Sintering Densification of Cu/Al2O3p Nano-Composite Powders by Electroless Copper Plating

Improvement of Electrical and Material Properties of Epoxy Resin/aluminum Nitride Nanocomposites for Packaging Materials

Electroless Co-P Alloy Plating of Superfine Si3N4 Powders

Preparation of AgSnO2 Nano-Composite Powder by Wet Chemical Method

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

Preparation of AgSnO_2 nano-composite powder by wet chemical method

Preparation of NiAl2O4/Al2O3 composite nanopowder

Study of Hot-press Sintering Process of Nanometer Cu-Al_2O_3 Composite

Preparation of ti-al based nanophase composite powder by mechanical alloying

Nanoparticle Reinforced Metal Composites Prepared by Electrocodeposition

Effect of nano-Al 2 O 3 particle addition on Co–P–xAl 2 O 3 nanocomposite plating electroplated on X65 steel

Influencing factors on the uniformity of copper coated nano-Al2O3 powders prepared by electroless plating

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

Structure and Properties of Electrocodeposited Cu-Al2o3 Nanocomposite Thin Films

Study of Preparation of Cobalt Aluminate by Sol-Gel Process and Electroless Plating

Microstructure of Nanometer-sized Al2O3 Composite Coating Prepared by Electroless Plating

Technology for Ni-Al2O3 Composite Coating and Its Properties

Preparation and Microstructure of Silver Nanopowder with Spheric Morphology