Abstract:Tungsten carbide (WC), celebrated for its exceptional strength, hardness, and chemical inertness, serves as an exemplary reinforcement for copper (Cu) matrix composite (CMC) coatings, significantly enhancing their wear and corrosion resistance. However, the inherent poor wettability and interfacial bonding between WC and Cu during the cold spray additive manufacturing process pose challenges to further performance improvement of these coatings. This study investigates cold-sprayed CMC coatings reinforced with WC particles, both with and without an electroless plated cobalt (Co) shell (Co@WC; at 10 wt.% and 20 wt.%), focusing on their microstructure, mechanical properties, tribological behavior, and electrochemical corrosion resistance. The findings indicate a reduction in CMC coatings` porosity and mean free path (MFP) of reinforcement particles with increasing reinforcement content. Despite slight Co shell damage during deposition, ceramic retention is notably enhanced, reaching up to 149.3%. The microhardness and wear resistance of CMC coating are improved with decreased MFP and increased ceramic content. Compared to the Cu coating, the microhardness of CMC coatings escalates by up to 32.9% (151.8HV0.1), and the specific wear rate is dramatically reduced by up to 84.2%. The Co shell effectively prevents the detachment of Co@WC particles, thereby enhancing the bending and wear resistance. Electrochemical corrosion tests, encompassing open circuit potential (EOCP), polarization curve, and electrochemical impedance spectroscopy (EIS), indicate that lower porosity, high ceramic content and the Co shell substantially boost the corrosion resistance of the CMC coating. Specifically, the coating with 20 wt.% Co@WC (Cu20(Co@WC)) demonstrates superior corrosion resistance compared to the Cu coating, hinting at the potential for further enhancement with increased ceramic content.

A facile fabrication of Ag/SiC composite coating with high mechanical properties and corrosion resistance by electroless plating

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Wear and Corrosion Properties of 316L-SiC Composite Coating Deposited by Cold Spray on Magnesium Alloy

Cold-sprayed Cu Matrix Composite Coatings with Core-Shell Structured Co@WC Reinforcements on Q235 Steel

Mechanically Strong Superhydrophobic Coating Based on Cu–SiC Electrochemical Composite

Influence of Ag Contents on Structure and Tribological Properties of TiSiN-Ag Nanocomposite Coatings on Ti–6Al–4V

The microstructure and properties of copper coating fabricated by high velocity arc spraying

Corrosion Resistance and Tribological Behavior of Ag-Ge/Nano-SiC Coatings Prepared by Pulse Electrodeposition

Enhanced mechanical and wear properties of Ni-W-SiC composite coatings by synergistic influence of micro-nano SiC mixture

Investigation on Microstructure and Properties of the Electrodeposited Ni-SiC Composite Coating

Fabrication and microstructure of W-Cu composites prepared from Ag-coated Cu powders by electroless plating

A Study on the Electrocodeposition Processes and Properties of Ni–SiC Nanocomposite Coatings

Novel Ag/Si composite particles through galvanic displacement and its conductive application

Study on superhydrophobicity and excellent corrosion resistance of a novel Ni‐SiC nanocomposite coating

Fabrication and performance of silver coated copper powder

Microstructure, wear and corrosion properties of Cu–SiC/WCCo composite coatings on the Cu substrate surface by plasma spray method

Study of Ag Sb coatings prepared by non-cyanide electrodeposition

Microstructure and properties of plasma sprayed copper-matrix composite coatings with Ti3SiC2 addition

Effect of silver plating and sintering temperature on the microstructure and mechanical properties of carbon fiber reinforced Cu matrix composites

Electrochemical Properties and XPS Analysis of Ni-B/SiC Nanocomposite Coatings

Antioxidant Behavior of Carbon/Carbon Composites with Hot Dip Plating and Electroplating for Single-Crystal Furnaces