Abstract:This study established a zero-dimensional numerical model integrating methanol steam reforming (MSR) and high-temperature proton exchange membrane fuel cells (HT-PEMFC), systematically investigating the effects of parameters such as steam-methanol (S/C) ratio, reformer reaction temperature, methanol catalytic combustion ratio, fuel cell number, and anode stoichiometry on the thermal, mass, electrical, and efficiency performance parameters of the integrated system. The results confirmed that the integrated system can achieve thermal self-sustained operation without the need for additional heat from methanol catalytic combustion. Improved insulation quality enables the attainment of thermal self-sufficiency at lower operating conditions. The molar ratio of CO in the reformate increases with a decrease in the S/C ratio and an increase in the reformer reaction temperature. The system achieves maximum output power and efficiency when S/C equals 1.25 and the reformer temperature is 513 K, with increases of 8.6 % and 37.1 %, respectively. The system efficiency is highly sensitive to the anode stoichiometry of the fuel cell, showing an 11.7 % improvement as the stoichiometry decreases from 2.0 to 1.2. Based on these results, three improvement measures were proposed to enhance the performance of MSR and HT-PEMFC integrated systems: improving system insulation to lower thermal self-sufficiency conditions, optimizing the stoichiometry of the bipolar plates for significant efficiency improvement, and selecting appropriate operating parameters for system components to enhance overall performance. This study quantitatively demonstrates the potential of these measures to improve system performance, providing valuable insights for the design and optimization of integrated systems.

Methane Steam Reforming for MCFC Reformer

Exergy analysis and CO2 emission evaluation for steam methane reforming

Exergy Analysis of Hydrogen Production by Steam Reforming of Hydrocarbons and Its Carbon Emission Evaluation

Operating Performance Characteristics and Analysis of a High Temperature Fuel Cell System Integrated with a Methanol Steam Reformer

Investigation of methanol steam reforming reformer heated by catalyst combustion for kW-scale fuel cell

Thermodynamic Analysis of Steam Methane Reforming for Hydrogen Production

Combination of Sorption-Enhanced Steam Methane Reforming and Electricity Generation by Mcfc: Concept and Numerical Simulation Analysis

Development of Integrated Thermally Autonomous Reformed Methanol-Proton Exchange Membrane Fuel Cell System

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

Coupling of high-temperature proton exchange membrane fuel cells with methanol steam reforming: Modeling and simulation for an integrated coupled for power generation system

Optimization of Methane Reforming for High Efficiency and Stable Operation of SOFC Stacks

Multi-objective optimization of steam methane reformer in micro chemically recuperated gas turbine

CFD simulation of methane steam reforming in a membrane reactor: Performance characteristics over range of operating window

Development of A Methane Steam Reformer Using an Electrically Heated Alumite Catalyst: Start-Up Performance Investigated by the Numerical and Experimental Analysis

Simulation of Internal Manifold-Type Molten Carbonate Fuel Cells (MCFCs) with Different Operating Conditions

STEAM REFORMING OF METHANE IN CATALYTIC MICROREACTORS FOR HYDROGEN PRODUCTION

Experimental Investigation on Methane Steam Reforming Over a Ni/YSZ Anode of Planar Solid Oxide Fuel Cell

Simulation of Sorption-Enhanced Steam Methane Reforming over Ni-Based Catalyst in a Pressurized Dual Fluidized Bed Reactor

Performance Simulations of a Compact Plate Methane Steam Reformer Using an Electrically Heated Alumite Catalyst

Steam Enhanced Carbon Dioxide Reforming of Methane in DBD Plasma Reactor