Abstract:Dry reforming of methane is one of the few chemical reactions which can effectively convert carbon dioxide (CO2), a major green-house gas, into a valuable chemical precursor, syngas (a mixture of CO and H2), that can be converted into chemicals and fuels via different synthesis routes such as the Fischer Tropsch synthesis. The inherent limitations of dry reforming reaction, for instance, rapid catalyst deactivation by coke deposition and the very high energy requirements, has restricted its use as a commercial technology. This study was performed to evaluate the potential of overcoming the limitations of dry reforming by integrating it with other commercial methane reforming technologies such as steam reforming and partial oxidation reforming in the context of industrial operating conditions. A thermodynamic and kinetic analysis of the combined reforming has been conducted using the software suite MATLAB®. The aim of this complicated assessment is to identify optimized combination of the three reformers and also the corresponding operating conditions that would utilize significant amount of CO2 while ensuring CO2 fixation, minimum carbon formation and optimum energy requirements. The thermodynamic equilibrium product distribution calculations involved the Peng Robinson (PR), Redlich Kwong (RK) and Soave Redlich Kwong (SRK) equations of state (EOS) to identify the best EOS that accounts for the non-ideality associated with the high pressure operation. The study evaluated simultaneous effects of temperature (200°C–1200°C), pressure (1–20bar) and feed mole ratios (of methane, steam, carbon dioxide and oxygen) on the equilibrium product distribution. The addition of oxygen and steam to dry reforming helped in decreasing energy requirements while simultaneously increasing the syngas yield ratio (H2:CO ratio). The numerical evaluation revealed an optimized operating condition of ∼750°C at 1bar pressure at a feed mole ratio CH4:H2O:O2:CO2 of 1:0.4:0.3:1. For this optimization, the system boundaries were limited only to a reformer block without considering the upstream and dowstream processes. At this optimized condition, the carbon deposition was eliminated and the CO2 conversion was observed to be 47.84% with an energy requirement of 180.26kJ. The study is further extended to include kinetic analysis of combined dry and steam reforming of methane. The preliminary findings of kinetic evaluation indicated an excellent agreement between combined kinetic model with the thermodynamic equilibrium results.

Multi-objective optimization of steam methane reformer in micro chemically recuperated gas turbine

The Coupling Performance During Reactive Sorption Enhanced Reforming (reser) Process: Simulation and Experimental Studies

Modeling and Simulation of Commercial Catalytic Reformers

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Exergy analysis and CO2 emission evaluation for steam methane reforming

Thermoeconomic analysis and multiobjective optimization of a combined gas turbine, steam, and organic Rankine cycle

Thermodynamic Analysis and Optimization for Steam Methane Reforming Hydrogen Production System Using High Temperature Gas-Cooled Reactor Pebble-Bed Module

Numerical Evaluation of a Microchannel Methane Reformer Used for Miniaturized GTL: Operating Characteristics and Greenhouse Gases Emission

Hybrid Modeling of Integrated Microchannel Methane Reformer for Miniaturized GTL Application Using an Effectiveness Factor Submodel Based on Complex Surface Chemistry

Research on the Optimization of the Operating Parameters of Methane Carbon Dioxide Reforming Using the Response Surface Methodology

Multi-objective optimization for membrane reactor for steam methane reforming heated by molten salt

An efficient methanol pre-reforming gas turbine combined cycle with integration of mid-temperature energy upgradation and CO 2 recovery: Thermodynamic and economic analysis

Methane Steam Reforming for MCFC Reformer

Techno-economic and environmental optimization of a combined regenerated gas turbine and supercritical CO2 cycle based on methane and hydrogen mixture as fuel for environmental remediation

A multiobjective optimization of a catalyst distribution in a methane/steam reforming reactor using a genetic algorithm

Multi-objective Optimization of Helical Coil Steam Generator in High Temperature Gas Reactors with Genetic Algorithm and Response Surface Method

PERFORMANCE COMPARISON OF GAS TURBINE CYCLE COMBINED WITH SUPERCRITICAL CO2 RECOMPRESSION AND REGENERATIVE CYCLE

Simulation of Sorption-Enhanced Steam Methane Reforming over Ni-Based Catalyst in a Pressurized Dual Fluidized Bed Reactor

A combined thermo-kinetic analysis of various methane reforming technologies: Comparison with dry reforming

Analysis of a Basic Chemically Recuperated Gas Turbine Power Plant

Thermoeconomic analysis and multi‐objective optimization of a solid‐oxide fuel cell plant coupled with methane tri‐reforming: Effects of thermochemical recuperation