An efficient methanol pre-reforming gas turbine combined cycle with integration of mid-temperature energy upgradation and CO 2 recovery: Thermodynamic and economic analysis

Zhicong Wu,Gang Xu,Shiyu Ge,Zhenjun Yang,Xiaojun Xue,Heng Chen

DOI: https://doi.org/10.1016/j.apenergy.2023.122599

IF: 11.2

2024-01-08

Applied Energy

Abstract:An innovative design has been developed to optimize the performance of the gas turbine combined cycle (GTCC) by integration with a decarbonized methanol steam reforming (MSR-deCO 2 ) system based on the principle of the cascade utilization of chemical and thermal exergy. In the integrated system , the primary fuel is reformed with the steam extracted from GTCC and decarbonized before combustion. The reforming process leads to a significant reduction of exergy loss in the combustor . Introducing methanol as a viable turbine fuel presents an opportunity for recuperating mid-temperature heat as chemical energy through endothermic MSR and redeeming it as high-grade thermal energy in the combustor. By such incorporation, the power generation of the mid-temperature heat in the bottoming cycle is significantly enhanced, and most of the CO 2 is removed as the liquid phase. Based on a 530 MW GTCC plant, thermodynamic analysis reveals a 4.6% energy efficiency increase, a 4.3% exergy efficiency boost, and an 82.2% CO 2 recovery with a 0.354 MJ/kgCO 2 energy penalty. The proposed design yields 454.4 M$ more profit than the reference power plant throughout its lifespan. Additionally, sensitivity analysis indicates optimal conditions for MSR at approximately 250 °C, a 1:1 water-to-methanol ratio, and a higher reaction pressure preference.

energy & fuels,engineering, chemical