Abstract:The main objective of this work is to present a new particle unresolved 3D-1D DEM-CFD-based model enabling predictions of a new steam methane reforming (SMR) driven by the direct electrical current. The main feature of this technology is the use of metal particles heated by the Joule heat resulting from direct electrical current flowing through metal particles in order to heat the gas phase and catalyst particles (Ni/ α -Al2O) to sustain endothermic chemical reactions. The model uses six gaseous chemical species (CH4, CO2, CO, H2O, H2, N 2 ) in the gas phase inside the catalyst. The Langmuir–Hinshelwood-Hougen-Watson (LHHW) kinetics is used. The distinguishing feature and the novelty of the model presented in this work consist in the calculation of the 3D distribution of the electric field inside non mono-disperse fixed beds. The electric field distribution is used to calculate the Joule heating term for each electrically conducting particle participating in the electrical current flow. Additionally, the new model predictions are compared with alternative models based on the chemical equilibrium principles. The models have been numerically solved using MATLAB. To illustrate the performance of the models and to check the feasibility of a new electrical steam methane reforming concept, we consider a cylindrical electrically insulated tube with a diameter of 0.1 m and a height of 0.5 m, which is filled with metal particles and catalyst particles with diameters of 5 mm and 2 mm, respectively. Parametric runs for different flow rates from 0.0025 kg/s to 0.01 kg/s and electrical power from 6.9 kW to 39 kW have been carried out. Results of simulations showed that an increase in the flow rate value ( m ̇ ) by keeping constant input electrical power leads to a decrease in the conversion of CH 4 proportionally to m ̇ - 1 / 2 . A linear increase in the flow rate and input power leads to a decrease in methane conversion. When the input electrical power is increased, the difference between catalyst particle temperature and gas temperature decreases.

Development of A Methane Steam Reformer Using an Electrically Heated Alumite Catalyst: Start-Up Performance Investigated by the Numerical and Experimental Analysis

Simulation and experimental analysis on the development of a co-axial cylindrical methane steam reformer using an electrically heated alumite catalyst

Performance Simulations of a Compact Plate Methane Steam Reformer Using an Electrically Heated Alumite Catalyst

Dynamics Simulations of a Novel Heat-Exchange Methane Reformer Using an Eelectrically Heated Alumite Catalyst

Two-Dimensional Coaxial Model for A Cylinder Methane Steam Reformer Using A Novel Plate Catalyst

Numerical investigations on the development of plate reformers: Comparison of different assignments of the chambers

Preparation of an Anodic Alumina-Supported Ni Catalyst and Development of a Catalytic Plate Reformer for the Steam Reforming of Methane

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

A Plate-Type Anodic Alumina Supported Nickel Catalyst for Methane Steam Reforming

Simulation of Sorption-Enhanced Steam Methane Reforming over Ni-Based Catalyst in a Pressurized Dual Fluidized Bed Reactor

STEAM REFORMING OF METHANE IN CATALYTIC MICROREACTORS FOR HYDROGEN PRODUCTION

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

Electrically heated monolithic catalyst for in-situ hydrogen production by methanol steam reforming

Steam methane reforming driven by the Joule heating

Numerical Evaluation of Heat Transfer and Conversion Efficiency by Tube Design and Flow Configuration for a Compact Steam-Methane Reformer

Unlocking Dynamics of Compact Methanol Reformers During On-Line Catalyst Activation Using Transient Computational Fluid Dynamics Simulation

DEM-based model for steam methane reforming

Innovative Cu/Ni/Fe/γ-Al2O3/Al Mesh-Type Catalyst and Compact Plate Reactor Design for Steam Reforming of Dimethyl Ether

Scale-up studies on electrically driven steam methane reforming

Methane Dry Reforming over Ni/Al2O3 Catalyst in Spark Plasma Reactor: Linking Computational Fluid Dynamics (CFD) with Reaction Kinetic Modelling

Electrified Methane Reforming: Understanding the Dynamic Interplay