Abstract:Catalytic routes for upgrading CO2 through Sabatier reaction CO 2 + 4 H 2 → CH 4 + 2 H 2 O have been studied for decades. To avoid water adsorption and catalyst aging, the process must be operated at 300-400 °C, which subsequently causes carbon deposition and catalyst deactivation. Non-thermal plasma is a promising approach to overcoming the barriers associated with CO2 dissociation and conversion, and avoid the carbon deposition observed in a traditional Sabatier reaction. This study elucidated; 1) the impacts of reactor geometry and plasma condition on plasma discharge; 2) the synergism between active site (Ni and Co) and catalyst support; and 3) the impact of catalyst promoter (Ru) on CO2 conversion, methanation yield, and selectivity. The physics and chemistry of plasma were investigated in 6 different reactor geometries using 28 different catalysts. The plasma physics was discussed as a function of discharge characteristics, capacitance properties, reduced electric field, power consumption, and reactor temperature. CO2 conversion, CH4 yield, and CH4/(CO+ CH4) selectivity are reported and compared with those under thermo-catalysis at 400 °C. In addition, carbon deposition on the surface of high-voltage electrodes as a result of Joule heating was investigated. In contrast to γAl2O3, CO selectivity was dominant in SiO2-supported catalysts. In terms of active sites, the following trend was observed for CO2 conversion, methanation, and yield: Ru>Ni>Co. The addition of Ru promoter played a more prominent role in enhancing CH4/(CO+ CH4) selectivity, other than production yield or conversion. Except for SiO2-Ni15 and SiO2-Co15, all the catalysts showed a higher methane yield in plasma discharge at 150-170 °C than thermal conversion at 400 °C.

Methane Dry Reforming over Ni/Al2O3 Catalyst in Spark Plasma Reactor: Linking Computational Fluid Dynamics (CFD) with Reaction Kinetic Modelling

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

Dry reforming of methane in an atmospheric pressure plasma fluidized bed with Ni/γ-Al2O3 catalyst

Experimental study on dry reforming of methane by a plasma catalytic hybrid system

Plasma Promotes Dry Reforming Reaction of CH4 and CO2 at Room Temperature with Highly Dispersed NiO/γ-Al2O3 Catalyst

Non-Thermal Plasma-Assisted Catalytic Dry Reforming of Methane and Carbon Dioxide over G-C 3 N 4 -Based Catalyst

Ordered mesoporous Ni-La2O3/Al2O3 catalysts towards efficient plasma-assisted dry reforming of methane

Catalytic Non-Thermal MilliPulse Plasma for Methanation of CO2 without Carbon Deposition and Catalyst Deactivation

Reforming of Methane and Carbon Dioxide by DC Water Plasma at Atmospheric Pressure

Dry Reforming of Methane in A Dielectric Barrier Discharge Reactor with Ni/Al2o3 Catalyst: Interaction of Catalyst and Plasma

Dry Reforming of Methane with Carbon Dioxide Using Pulsed Dc Arc Plasma at Atmospheric Pressure

Plasma-enhanced preparation of nickel-based catalyst for carbon dioxide reforming of methane

Dry Reforming of Methane in a Nanosecond Repetitively Pulsed Discharge: Chemical Kinetics Modeling

Non-Oxidative Coupling of Methane via Plasma-Catalysis Over M/γ-Al2O3 Catalysts (M = Ni, Fe, Rh, Pt and Pd): Impact of Active Metal and Noble Gas Co-Feeding

Optimization of Discharge Plasma Reactor for Dry Reforming of Methane using Response Surface Methodology

Glow Discharge Plasma-Assisted Preparation of Nickel-Based Catalyst for Carbon Dioxide Reforming of Methane

Carbon Dioxide Reforming of Methane in Kilohertz Spark‐discharge Plasma at Atmospheric Pressure

Plasma-catalytic Reforming of CO 2 -Rich Biogas over Ni/γ-Al 2 O 3 Catalysts in a Rotating Gliding Arc Reactor

Carbon Dioxide and Methane Reforming Using DC Arc Plasma Reactor

Actively Learned Optimal Sustainable Operation of Plasma-Catalyzed Methane Bireforming on La0.7Ce0.3NiO3 Perovskite Catalyst

Plasma-assisted Dry Reforming of Methane over Mo2C-Ni/Al2O3 Catalysts: Effects of Β-Mo2c Promoter