Abstract:Biogas reforming to syngas is an attractive route for the efficient utilization of biogas. In this work, plasma-catalytic dry reforming of biogas into value-added fuels and chemicals over Ni-based bimetallic catalysts was achieved using dielectric barrier discharge (DBD). The coupling DBD with 10Ni3Co exhibited the best reaction performance, reflected by the highest gas conversion, main gas product yield and selectivity, and fuel production efficiency (FPE). This hybrid process also favored the suppression of carbon deposition on the catalyst surface and the reduction of energy cost for both gas conversion and product formation. The maximum CO2 and CH4 conversion (29.8% and 49.1%) was obtained when the discharge power was 60 W, while a low discharge power (30 W) led to the highest FPE of 12.3%. By using Ni-based catalysts, we were able to tune the product distribution, favoring the generation of C3-C4 hydrocarbons and syngas while reducing the production of C2 hydrocarbons, with 10Ni3Co providing the most favorable results. Compared to other spent catalysts, the lowest carbon deposition (2.9%) was detected on the spent 10Ni3Co after 150 min of plasma reforming. Catalyst characterizations and density functional theory (DFT) calculations showed that the 10Ni3Co catalyst was superior due to a combination of factors such as a higher specific surface area, improved capability to adsorb CO2, strong interactions between the metals and the support, enhanced reducibility and the formation of a Ni-Co alloy. Furthermore, a simplified kinetics model was developed to better understand the effects of Ni-based bimetallic catalysts on the overall energy constant for the conversion of reactants in plasma-catalytic reforming of biogas.

Plasma Promotes Dry Reforming Reaction of CH4 and CO2 at Room Temperature with Highly Dispersed NiO/γ-Al2O3 Catalyst

Plasma Enhanced Preparation of Highly Dispersed Ni/Al2O3 Catalyst for CO2 Reforming of Methane

Carbon Dioxide Reforming of Methane over Ni/Al2O3 Treated with Glow Discharge Plasma

Structure and Reactivity of Plasma Treated Ni/Al2O3 Catalyst for CO2 Reforming of Methane

Dry reforming of methane in an atmospheric pressure plasma fluidized bed with Ni/γ-Al2O3 catalyst

The atomic-level adjacent NiFe bimetallic catalyst significantly improves the activity and stability for plasma-involved dry reforming reaction of CH 4 and CO 2

Ordered mesoporous Ni-La2O3/Al2O3 catalysts towards efficient plasma-assisted dry reforming of methane

Efficient Zr-MCM-41 supported nickel phyllosilicate catalyst for the plasma-involved dry reforming of CH 4 and CO 2

Methane Dry Reforming over Ni/Al2O3 Catalyst in Spark Plasma Reactor: Linking Computational Fluid Dynamics (CFD) with Reaction Kinetic Modelling

Preparation and Characterization of A Plasma Treated Nimgsba-15 Catalyst for Methane Reforming with Co2 to Produce Syngas

Boosting Dry Reforming of Methane Over NiCo/CeO2 Catalysts Treated by Hydrogen Plasma

Cold plasma and ethanol coupling-activated Ni/MCM-41 catalysts with highly stability and activity for dry reforming of methane

Plasma Treatment of Ni Catalyst for Partial Oxidation of Methane

Plasma-enhanced catalysis of CO 2 reforming of propane on Ni/γ-Al 2O 3 catalyst

Experimental study on dry reforming of methane by a plasma catalytic hybrid system

Plasma-catalytic Reforming of CO 2 -Rich Biogas over Ni/γ-Al 2 O 3 Catalysts in a Rotating Gliding Arc Reactor

High activity and strong coke resistance of nickel CO 2 -CH 4 reforming catalyst promoted by different plasma treated modes

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

CTAB-assisted radio frequency discharge plasma treatment enhances catalytic activity at sustained coking resistance of Nickel-based catalysts for CO 2 /CH 4 reforming reaction

Carbon dioxide reforming of methane a novel Ni/Al 2O catalysts

Plasma-catalytic reforming of biogas into syngas over Ni-based bimetallic catalysts