Abstract:Biogas reforming to syngas is an attractive route for the efficient utilization of biogas. In this work, plasma-catalytic dry reforming of biogas into value-added fuels and chemicals over Ni-based bimetallic catalysts was achieved using dielectric barrier discharge (DBD). The coupling DBD with 10Ni3Co exhibited the best reaction performance, reflected by the highest gas conversion, main gas product yield and selectivity, and fuel production efficiency (FPE). This hybrid process also favored the suppression of carbon deposition on the catalyst surface and the reduction of energy cost for both gas conversion and product formation. The maximum CO2 and CH4 conversion (29.8% and 49.1%) was obtained when the discharge power was 60 W, while a low discharge power (30 W) led to the highest FPE of 12.3%. By using Ni-based catalysts, we were able to tune the product distribution, favoring the generation of C3-C4 hydrocarbons and syngas while reducing the production of C2 hydrocarbons, with 10Ni3Co providing the most favorable results. Compared to other spent catalysts, the lowest carbon deposition (2.9%) was detected on the spent 10Ni3Co after 150 min of plasma reforming. Catalyst characterizations and density functional theory (DFT) calculations showed that the 10Ni3Co catalyst was superior due to a combination of factors such as a higher specific surface area, improved capability to adsorb CO2, strong interactions between the metals and the support, enhanced reducibility and the formation of a Ni-Co alloy. Furthermore, a simplified kinetics model was developed to better understand the effects of Ni-based bimetallic catalysts on the overall energy constant for the conversion of reactants in plasma-catalytic reforming of biogas.

Plasma-enhanced catalysis of CO 2 reforming of propane on Ni/γ-Al 2O 3 catalyst

Non-thermal Plasma Assisted CO2 Reforming of Propane over Ni/γ-Al2O3 Catalyst

Structure and Reactivity of Plasma Treated Ni/Al2O3 Catalyst for CO2 Reforming of Methane

Carbon Dioxide Reforming of Methane over Ni/Al2O3 Treated with Glow Discharge Plasma

Plasma Enhanced Preparation of Highly Dispersed Ni/Al2O3 Catalyst for CO2 Reforming of Methane

Plasma Promotes Dry Reforming Reaction of CH4 and CO2 at Room Temperature with Highly Dispersed NiO/γ-Al2O3 Catalyst

Plasma-catalytic reforming of biogas into syngas over Ni-based bimetallic catalysts

Coupling bimetallic Ni-Fe catalysts and nanosecond pulsed plasma for synergistic low-temperature CO2 methanation

Biogas Reforming for Hydrogen-Rich Syngas Production over a Ni–K/Al2O3 Catalyst Using a Temperature-Controlled Plasma Reactor

Enhanced CO2 hydrogenation to light hydrocarbons on Ni-based catalyst by DBD plasma

Preparation and Characterization of A Plasma Treated Nimgsba-15 Catalyst for Methane Reforming with Co2 to Produce Syngas

Development of Coke Resistant Ni Catalysts for CO(2) Reforming of Methane via Glow Discharge Plasma Treatment

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

Temperature-Programmed Studies of Coke Resistant Ni Catalyst for Carbon Dioxide Reforming of Methane

Plasma Assisted Catalytic Conversion of CO2 and H2O Over Ni/Al2O3 in a DBD Reactor

Plasma-Catalytic Conversion of CO2 and H2O into H2, CO, and Traces of CH4 over NiO/Cordierite Catalysts

Plasma Treatment of Ni Catalyst for Partial Oxidation of Methane

Dry Reforming of Methane in A Dielectric Barrier Discharge Reactor with Ni/Al2o3 Catalyst: Interaction of Catalyst and Plasma

Plasma-catalytic Reforming of CO 2 -Rich Biogas over Ni/γ-Al 2 O 3 Catalysts in a Rotating Gliding Arc Reactor

Plasma Catalysis-Driven Decomposition of CO2: Optimizing Energy Distribution with NiCo-CuO Catalyst

Non-Oxidative Coupling of Methane via Plasma-Catalysis Over M/γ-Al2O3 Catalysts (M = Ni, Fe, Rh, Pt and Pd): Impact of Active Metal and Noble Gas Co-Feeding