Abstract:The increasing utilization of CO2 for synthesizing high-value fuels or essential chemicals is a potentially effective approach to mitigating global warming and climate change. Compared to thermal catalytic CO2 conversion under harsh operating conditions (400∼500°C, 10 MPa), non-thermal plasma can overcome kinetic barriers and trigger reactions beyond thermal equilibrium at ambient temperature and pressure. In this study, the effects of operating conditions (discharge frequency, input power, and gas flow rate) and geometrical parameters (discharge length, discharge gap, and dielectric materials) have been extensively analyzed using typical cylindrical dielectric barrier discharge (DBD) plasma. The discharge characteristics changed by operating conditions (including waveforms of applied voltage and current) are compared, indicating higher applied voltage and lower gas flow rate can strengthen the filamentary discharges. The results demonstrate CO2 conversion rate increases with the increase of applied voltage and the decrease of CO2/H2 ratio, achieving its maximum value of 43.0% at 20 mL/min. The highest energy efficiency of 3771.9 μg/kJ for CO generation is obtained at the applied voltage of 5.5 kV and gas flow rate of 40 mL/min, respectively. Besides, the structure of plasma reactor also impacts the performance of CO2 conversion. On the one hand, the discharge gap has a significant role in the variation of CO2 conversion and product selectivity, which is attributed to the electric field density and corresponding electron-induced reaction. On the other hand, the circulating water-cooling jacket was used to find out the influence of reaction temperature, which switched the product from CO to CH4. This work will pave the way for a sustainable alternative towards future CO2 conversion and utilization.

Plasma Assisted Catalytic Conversion of CO2 and H2O Over Ni/Al2O3 in a DBD Reactor

Dielectric Barrier Discharge Plasma-Assisted Catalytic CO2 Hydrogenation: Synergy of Catalyst and Plasma

Enhanced CO2 hydrogenation to light hydrocarbons on Ni-based catalyst by DBD plasma

Investigation of Highly Efficient CO2 Hydrogenation at Ambient Conditions Using Dielectric Barrier Discharge Plasma

Plasma‐assisted Synthesis of Methanol Through Hydrogenation of Carbon Dioxide with Non‐Noble Metal Mixed Oxide Catalysts

Plasma-enhanced catalysis of CO 2 reforming of propane on Ni/γ-Al 2O 3 catalyst

Boosting CO 2 Conversion by Synergy of Lead-Free Perovskite Cs 2 SnCl 6 and Plasma with H 2 O

Engineering Ni-Co Bimetallic Interfaces for Ambient Plasma-Catalytic CO2 Hydrogenation to Methanol

Synergy Study for Plasma-Facilitated Catalytic Reduction of NOx

Plasma Catalytic Non-Oxidative Conversion of Methane into Hydrogen and Light Hydrocarbons

Biogas Reforming for Hydrogen-Rich Syngas Production over a Ni–K/Al2O3 Catalyst Using a Temperature-Controlled Plasma Reactor

Methane Dry Reforming over Ni/Al2O3 Catalyst in Spark Plasma Reactor: Linking Computational Fluid Dynamics (CFD) with Reaction Kinetic Modelling

Coupling bimetallic Ni-Fe catalysts and nanosecond pulsed plasma for synergistic low-temperature CO2 methanation

Enhanced methanol selectivity and synthesis in a non-catalytic dielectric barrier discharge (DBD) plasma reactor

Wet Conversion of Methane and Carbon Dioxide in a DBD Reactor

Plasma-catalytic Reforming of CO 2 -Rich Biogas over Ni/γ-Al 2 O 3 Catalysts in a Rotating Gliding Arc Reactor

Catalytic Non-Thermal MilliPulse Plasma for Methanation of CO2 without Carbon Deposition and Catalyst Deactivation

Non-Oxidative Coupling of Methane via Plasma-Catalysis Over M/γ-Al2O3 Catalysts (M = Ni, Fe, Rh, Pt and Pd): Impact of Active Metal and Noble Gas Co-Feeding

Plasma-catalytic reforming of biogas into syngas over Ni-based bimetallic catalysts

Enhanced hydrogen production using a tandem biomass pyrolysis and plasma reforming process

Plasma‐driven CO2 hydrogenation to CH3OH over Fe2O3/γ‐Al2O3 catalyst