Abstract:The increasing utilization of CO2 for synthesizing high-value fuels or essential chemicals is a potentially effective approach to mitigating global warming and climate change. Compared to thermal catalytic CO2 conversion under harsh operating conditions (400∼500°C, 10 MPa), non-thermal plasma can overcome kinetic barriers and trigger reactions beyond thermal equilibrium at ambient temperature and pressure. In this study, the effects of operating conditions (discharge frequency, input power, and gas flow rate) and geometrical parameters (discharge length, discharge gap, and dielectric materials) have been extensively analyzed using typical cylindrical dielectric barrier discharge (DBD) plasma. The discharge characteristics changed by operating conditions (including waveforms of applied voltage and current) are compared, indicating higher applied voltage and lower gas flow rate can strengthen the filamentary discharges. The results demonstrate CO2 conversion rate increases with the increase of applied voltage and the decrease of CO2/H2 ratio, achieving its maximum value of 43.0% at 20 mL/min. The highest energy efficiency of 3771.9 μg/kJ for CO generation is obtained at the applied voltage of 5.5 kV and gas flow rate of 40 mL/min, respectively. Besides, the structure of plasma reactor also impacts the performance of CO2 conversion. On the one hand, the discharge gap has a significant role in the variation of CO2 conversion and product selectivity, which is attributed to the electric field density and corresponding electron-induced reaction. On the other hand, the circulating water-cooling jacket was used to find out the influence of reaction temperature, which switched the product from CO to CH4. This work will pave the way for a sustainable alternative towards future CO2 conversion and utilization.

Dielectric Barrier Discharge Plasma-Assisted Catalytic CO2 Hydrogenation: Synergy of Catalyst and Plasma

Enhanced CO2 hydrogenation to light hydrocarbons on Ni-based catalyst by DBD plasma

Investigation of Highly Efficient CO2 Hydrogenation at Ambient Conditions Using Dielectric Barrier Discharge Plasma

Plasma Assisted Catalytic Conversion of CO2 and H2O Over Ni/Al2O3 in a DBD Reactor

Mechanism of plasma chemistry in CO2 hydrogenation using a dielectric barrier discharge reactor

The CO2 Conversion in a DBD Plasma: A 1D Synergistic Catalysis Model

A Review of Recent Advances of Dielectric Barrier Discharge Plasma in Catalysis

Unlocking the Potential of Cu/TiCT MXene Catalyst in Plasma Catalytic CO2 Hydrogenation

Plasma-enabled electrification of chemical processes toward decarbonization of society

Unlocking the Potential of Cu/Ti 3 C 2 T X MXene Catalyst in Plasma Catalytic CO 2 Hydrogenation

Disentangling metallic cobalt sites and oxygen vacancy effects in synergistic plasma-catalytic CO2/CH4 conversion into oxygenates

Unlocking the Potential of Cu/Ti3C2Tx MXene Catalyst in Plasma Catalytic CO2 Hydrogenation

Plasma-enhanced catalysis of CO 2 reforming of propane on Ni/γ-Al 2O 3 catalyst

CO2-CH4 conversion and syngas formation at atmospheric pressure using a multi-electrode dielectric barrier discharge

Steam Enhanced Carbon Dioxide Reforming of Methane in DBD Plasma Reactor

Enhanced methanol selectivity and synthesis in a non-catalytic dielectric barrier discharge (DBD) plasma reactor

Boosting CO 2 Conversion by Synergy of Lead-Free Perovskite Cs 2 SnCl 6 and Plasma with H 2 O

Engineering Ni-Co Bimetallic Interfaces for Ambient Plasma-Catalytic CO2 Hydrogenation to Methanol

Plasma Catalytic Non-Oxidative Conversion of Methane into Hydrogen and Light Hydrocarbons

Non-thermal plasma-catalytic processes for CO2 conversion toward circular economy: fundamentals, current status, and future challenges

Plasma-Enhanced Chemical Looping Oxidative Coupling of Methane through Synergy between Metal-Loaded Dielectric Particles and Non-Thermal Plasma