Abstract:Efficient production of H 2 by combined (steam/CO 2 ; steam/O 2 ) reforming of CH 4 was comparatively studied over perovskite-derived promoted Ni catalysts. The process performance was improved by regulating the redox and structural properties of the LaNi 0.99 M 0.01 O 3 catalysts through promotion (M = Pt, Pd, Re, Mo, Sn). The catalysts were synthesized using the citrate sol–gel method, tested in combined reforming of methane and studied by X-ray fluorescence analysis, thermal analysis, N 2 adsorption, X-ray diffraction, electron microscopy, temperature-programed hydrogen reduction to elucidate the impact of catalyst properties on their activity and resistance to re-oxidation and formation of carbon deposits under reaction conditions. It was shown that LaNi 0.99 M 0.01 O 3 catalysts after calcination at 850 °C in air have a perovskite structure that was destroyed after reductive activation with formation of metal Ni o particles with an average size of ~ 25 nm on the surface of lanthanum oxide/hydroxide. The resistance to re-oxidation of Ni o particles depends on the type of promoter and is maximum in the case of M = Re. It was established that the type of promoter affects the conversion of reagents (CH 4 , CO 2 ) and the H 2 yield, which at 700 °C increases in the series of promoters Sn < Mo < Pt < Pd < Re in the case of steam/CO 2 reforming and Pt < Sn < Mo < Pd < Re with steam/O 2 reforming. The optimal composition of catalyst was identified: among the studied samples, LaNi 0.99 Re 0.01 O 3 is characterized by a higher specific surface area, average reduction ability and high resistance to re-oxidation and coking. At 850 °C it provides the H 2 yield of 95 and 50% at complete CH 4 conversion in steam/CO 2 and steam/O 2 reforming, respectively.

Actively Learned Optimal Sustainable Operation of Plasma-Catalyzed Methane Bireforming on La0.7Ce0.3NiO3 Perovskite Catalyst

Methane Dry Reforming over Ni/Al2O3 Catalyst in Spark Plasma Reactor: Linking Computational Fluid Dynamics (CFD) with Reaction Kinetic Modelling

Plasma-catalytic reforming of biogas into syngas over Ni-based bimetallic catalysts

Preparation and Characterization of A Plasma Treated Nimgsba-15 Catalyst for Methane Reforming with Co2 to Produce Syngas

Ordered mesoporous Ni-La2O3/Al2O3 catalysts towards efficient plasma-assisted dry reforming of methane

Non-Oxidative Coupling of Methane via Plasma-Catalysis Over M/γ-Al2O3 Catalysts (M = Ni, Fe, Rh, Pt and Pd): Impact of Active Metal and Noble Gas Co-Feeding

Catalytic Non-Thermal MilliPulse Plasma for Methanation of CO2 without Carbon Deposition and Catalyst Deactivation

Non-thermal plasma enabled catalytic dry reforming of methane over ceria nanorods supported NiO catalyst: the role of Ru as coke resistant active sites

Engineering Ni-Co Bimetallic Interfaces for Ambient Plasma-Catalytic CO2 Hydrogenation to Methanol

Atomic Cerium Modulated Palladium Nanoclusters Exsolved Ferrite Catalysts for Lean Methane Conversion

Modulating Oxidation State of Ni/CeO2 Catalyst for Steam Methane Reforming: a Theoretical Prediction with Experimental Verification

Structure and Reactivity of Plasma Treated Ni/Al2O3 Catalyst for CO2 Reforming of Methane

Experimental study on dry reforming of methane by a plasma catalytic hybrid system

Ni/Ce0.9Eu0.1O1.95 with enhanced coke resistance for dry reforming of methane

Plasma-catalytic Reforming of CO 2 -Rich Biogas over Ni/γ-Al 2 O 3 Catalysts in a Rotating Gliding Arc Reactor

Atypical Stability of Exsolved Ni-Fe Alloy Nanoparticles on Double Layered Perovskite for Co2 Dry Reforming of Methane

Biogas Reforming for Hydrogen-Rich Syngas Production over a Ni–K/Al2O3 Catalyst Using a Temperature-Controlled Plasma Reactor

Improving the performance of gliding arc plasma-catalytic dry reforming via a new post-plasma tubular catalyst bed

Combined Steam and CO2 Reforming of Methane over Ni-Based CeO2-MgO Catalysts: Impacts of Preparation Mode and Pd Addition

Efficient Hydrogen Production by Combined Reforming of Methane over Perovskite-Derived Promoted Ni Catalysts

Lamellar cross-linking Ni/CeO 2 as an efficient and durable catalyst for dry reforming of methane