Abstract:In the chemical industry, hydrogen (H2) production through steam-methane reforming is a well-established process. With the growing demand for H-fueled vehicles and charging stations, there is a need for compact reformers with efficient heat transfer capabilities. In this study, computational fluid dynamics simulations were performed to evaluate the methane (CH4) conversion and heat transfer efficiency of various reformer designs. These designs include single, double, and triple tubes, each with parallel- and counter-flow configurations between the reformate feed and heat source. The findings revealed substantial disparities in methane conversion between the tube designs and flow configurations. Notably, the triple-tube design outperforms single and double tubes, exhibiting higher methane conversion and improved heat transfer efficiency. This superior performance is attributed to the larger wall area facing the heat source and additional heat recovery from the reformate flowing in the inner annulus. This led to the highest temperature at the catalyst exit among the cases, increasing methane conversion, and the lowest reformate temperature at the reformer tube exit, which is also beneficial for the subsequent water–gas shift reaction process. Installing external fins on the reformer tube provided a more effective enhancement of heat transfer than using internal fins in the catalyst section. Regardless of the tube design employed, the counter-flow configuration consistently enhanced the heat transfer efficiency, resulting in 4.6–11.9% higher methane conversion than the parallel-flow configuration. Consequently, the triple-tube design with the counter-flow configuration achieved the highest methane conversion, offering flexibility in the reformer design, including the potential for lower heat input and a reduced catalyst volume.

Dynamics Simulations of a Novel Heat-Exchange Methane Reformer Using an Eelectrically Heated Alumite Catalyst

Performance Simulations of a Compact Plate Methane Steam Reformer Using an Electrically Heated Alumite Catalyst

Development of A Methane Steam Reformer Using an Electrically Heated Alumite Catalyst: Start-Up Performance Investigated by the Numerical and Experimental Analysis

Simulation and experimental analysis on the development of a co-axial cylindrical methane steam reformer using an electrically heated alumite catalyst

Numerical investigations on the development of plate reformers: Comparison of different assignments of the chambers

Two-Dimensional Coaxial Model for A Cylinder Methane Steam Reformer Using A Novel Plate Catalyst

Numerical Evaluation of Heat Transfer and Conversion Efficiency by Tube Design and Flow Configuration for a Compact Steam-Methane Reformer

Preparation of an Anodic Alumina-Supported Ni Catalyst and Development of a Catalytic Plate Reformer for the Steam Reforming of Methane

Numerical Simulation of Enhanced Heat Transfer in Tubes Using Methane Steam Reforming

Electrified Methane Reforming: Understanding the Dynamic Interplay

NUMERICAL SIMULATION OF ENHANCED CONVECTION HEAT TRANSFER USING METHANE-STEAM REFORMING IN CATALYST FILMS IN A VERTICAL TUBE

Dynamic Electrification of Dry Reforming of Methane with In Situ Catalyst Regeneration

Simulation of Sorption-Enhanced Steam Methane Reforming over Ni-Based Catalyst in a Pressurized Dual Fluidized Bed Reactor

Electrically heated monolithic catalyst for in-situ hydrogen production by methanol steam reforming

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Scale-up studies on electrically driven steam methane reforming

Simulation of Non-Catalytic Partial Oxidation and Scale-Up of Natural Gas Reformer

Numerical Analysis of Steam Reformer of Steam Methane Reforming Hydrogen Production System Connected with High Temperature Gas Cooled Reactor

Simulation and enhancement of axial temperature distribution in a reactor filled with in-situ electrically heated structured catalyst

Heat Sink and Conversion of Catalytic Steam Reforming for Hydrocarbon Fuel

STEAM REFORMING OF METHANE IN CATALYTIC MICROREACTORS FOR HYDROGEN PRODUCTION