Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Numerical Simulation of Enhanced Heat Transfer in Tubes Using Methane Steam Reforming

NUMERICAL SIMULATION OF ENHANCED CONVECTION HEAT TRANSFER USING METHANE-STEAM REFORMING IN CATALYST FILMS IN A VERTICAL TUBE

Numerical Evaluation of Heat Transfer and Conversion Efficiency by Tube Design and Flow Configuration for a Compact Steam-Methane Reformer

Numerical Analysis on Steam Methane Reforming in a Plate Microchannel Reactor: Effect of Washcoat Properties

Numerical Studies of Supercritical Turbulent Convective Heat Transfer of Cryogenic-Propellant Methane

Numerical investigation of hydrogen production via methane steam reforming in a novel packed bed reactor integrated with diverging tube

Numerical Study of Conjugate Heat Transfer of Cryogenic Methane in Rectangular Engine Cooling Channels at Supercritical Pressures

Three-dimensional Numerical Study of Supercritical Pressure Effect on Heat Transfer of Cryogenic Methane

Numerical study of supercritical-pressure fluid flows and heat transfer of methane in ribbed cooling tubes

Three-Dimensional Computation Fluid Dynamics Simulation of CO Methanation Reactor with Immersed Tubes

Heat transfer analysis of a tube-in-tube steam reformer for the application of MGT-SOFC hybrid process

Numerical Analysis of Steam Reformer of Steam Methane Reforming Hydrogen Production System Connected with High Temperature Gas Cooled Reactor

Numerical simulation of heat‐pipe and folded reformers for efficient hydrogen production through methane autothermal reforming

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Topology optimization of the catalyst distribution of planar methane steam reformers

Numerical Analysis of the Catalytic Combustion of Premixed Methane/Air Mixtures in Microtubes

Numerical simulation on flow and reaction characteristics for catalytic region in helium-heated steam reformer coupled with HTR-10

CFD Simulation with Detailed Chemistry of Steam Reforming of Methane for Hydrogen Production in an Integrated Micro-Reactor

Sensitivity Analysis of Influencing Factors of Supercritical Methane Flow and Heat Transfer in a U-Tube

Design and optimization of spiral heated tubular dimethyl ether (DME) steam reforming reactor

Numerical Simulation of Thermal Performance for the Reaction Tubes in a Miniaturized Methanol Synthesis Reactor