Abstract:The systematic and rigorous model-based optimization of the configuration and operating conditions of a methane membrane steam reforming reactor for hydrogen production is performed. A permeable membrane with Pd–Ru deposited on a ceramic dense support is used to selectively remove the produced hydrogen from the reaction zone. The shifted chemical equilibrium towards hydrogen production enables the achievement of high methane conversion at relatively low reactor temperature levels. Steam reforming takes place over a Ni–Pt/CeZnLa ceramic foam-supported catalyst that ensures better thermal distribution, at an operating temperature of 773 K and a pressure of 106 Pa. A nonlinear, two-dimensional, and pseudo-homogeneous mathematical model of the membrane fixed-bed reactor is developed and subsequently validated using experimental data. For model validation purposes, two sets of experiments have been performed at the experimental reactor installed at CPERI/CERTH. The first set of experiments aims to investigate membrane permeability in order to estimate the parameters involved in the applied Sieverts law. The second set of experiments explores the performance of the membrane reactor at different steam to carbon ratios and total inlet volumetric flowrates. The derived mathematical model, consisted of mass, energy, and momentum balances that consider both axial and radial gradients of temperature and concentration, is then utilized within a model-based optimization framework that calculates the optimal operating conditions for the highly interactive reactor system. The optimal steam to carbon ratio and sweep gas flow rate that minimize the overall methane utilization (i.e., reformed methane and equivalent methane for heating purposes) are calculated for a range of hydrogen production rates. Τhe optimal reactor design configuration described by the length of the catalyst zone is also obtained for a given pure hydrogen production rate.

Topology optimization of the catalyst distribution of planar methane steam reformers

Topology optimization of catalyst bed structure for a solar steam methane reforming reactor aiming at improved conversion efficiency and hydrogen yield

Nickel‐Catalyzed Dry Reforming of Methane Via Modulating the Zirconia Shapes

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Preparation of an Anodic Alumina-Supported Ni Catalyst and Development of a Catalytic Plate Reformer for the Steam Reforming of Methane

Numerical Evaluation of Heat Transfer and Conversion Efficiency by Tube Design and Flow Configuration for a Compact Steam-Methane Reformer

Simulative Optimization of Catalyst Configuration for Biogas Dry Reforming

Managing Temperature Uniformity of Thermally Integrated Micro Reformers with Different Axial Dimensions: A Detailed Numerical Study

Experimental study of hydrogen catalytic combustion wall temperature distribution characteristics and its effect on the coupling performance of autothermal reformers

Thermal management of natural gas production from coke oven gas by optimizing catalyst distribution and operation conditions

Tri-reforming of methane to syngas over Ni/Al2O3 — Thermal distribution in the catalyst bed

Numerical Simulation of Enhanced Heat Transfer in Tubes Using Methane Steam Reforming

Catalysts in Coronas: A Surface Spatial Confinement Strategy for High-Performance Catalysts in Methane Dry Reforming

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

The Key Points of Highly Stable Catalysts for Methane Reforming with Carbon Dioxide

Process Optimization for Syngas Production from the Dry Reforming of Methane over 5Ni+3Sr/10Zr+Al Catalyst Using Multiple Response Surface Methodology

A multiobjective optimization of a catalyst distribution in a methane/steam reforming reactor using a genetic algorithm

Numerical Analysis on Steam Methane Reforming in a Plate Microchannel Reactor: Effect of Washcoat Properties

Optimization of an experimental membrane reactor for low-temperature methane steam reforming

Enhanced Thermocatalytic Stability by Coupling Nickel Step Sites with Nitrogen Heteroatoms for Dry Reforming of Methane