Abstract:The increasing concentration of CO 2 and CH 4 in the environment is a global concern. Tri-reforming of methane (TRM) is a promising route for the conversion of these two greenhouse gases to more valuable synthesis gas with an H 2 /CO ratio of 1.5–2. In this study, a series of Zr-MOF synthesized via the solvothermal method and impregnation technique was used to synthesize the nickel impregnated on MOF-derived ZrO 2 catalyst. The catalyst was characterized by various methods, including N 2 -porosimetry, X-ray diffraction (XRD), temperature programmed reduction (TPR), CO 2 -temperature programmed desorption (CO 2 -TPD), thermo-gravimetric analysis (TGA), chemisorption, field-emission scanning electron microscopy (FE-SEM), and high-resolution transmission electron microscopy (HR-TEM). Characterization results confirmed the formation of the Zr-MOF and nickel metal dispersed on MOF-derived ZrO 2 . Further, the tri-reforming activity of the catalyst developed was evaluated in a downflow-packed bed reactor. The various catalysts were screened for TRM activity at different temperatures (600–850 °C). Results demonstrated that TRM was highly favorable over the NZ-1000 catalyst due to its desirable physicochemical properties, including nickel metal surface area (2.3 m 2 /g cat −1 ), metal dispersion (7.1%), and nickel metal reducibility (45%), respectively. Over the NZ-1000 catalyst, an optimum H 2 /CO ratio of ~ 1.6–2 was achieved at 750 °C, and it was stable for a longer period of time.

Tri-reforming of methane to syngas over Ni/Al2O3 — Thermal distribution in the catalyst bed

Syngas production from methane dry reforming over Ni/Al2O3 catalyst

Trireforming Of Methane To Syngas Over Supported Carbide Catalysts

Carbon dioxide reforming of methane over a novel Ni/Al2O3 catalysts

Comparative Study Between Fluidized Bed and Fixed Bed Reactors in Methane Reforming with CO2 and O2 to Produce Syngas

Tri-reforming of methane over Ni catalysts for CO2 conversion to Syngas with desired H2CO ratios using flue gas of power plants without CO2 separation

Tailored Ni-MgO Catalysts: Unveiling Temperature-Driven Synergy in CH4-CO2 Reforming

Combination of CO 2 reforming and partial oxidation of CH 4 over Ni/Al 2 O 3 catalysts using fluidized bed reactor

Reforming of Ch4 with Co2 and O-2 to Produce Syngas over Cao Modified Ni/Sio2 Catalysts in A Fluidized Bed Reactor

Syngas Production from Reforming of Methane with Co2 and O-2 over Ni/Sro-Sio2 Catalysts in A Fluidized Bed Reactor

Tri-reforming of methane over Ni/ZrO2 catalyst derived from Zr-MOF for the production of synthesis gas

Tri-reforming of Methane to Synthesis Gas

Combination of CO2 Reforming and Partial Oxidation of Methane over Ni/BaO-SiO2 Catalysts to Produce Low H2/CO Ratio Syngas Using a Fluidized Bed Reactor

Study on Reforming of CH4 and C3H8 with CO2 and O2 to Syngas in a Fluidized Bed Reactor

Dry reforming of methane in an atmospheric pressure plasma fluidized bed with Ni/γ-Al2O3 catalyst

Autothermal Reforming of CH4 and C3H8 to Syngas in a Fluidized-Bed Reactor

Bi-reforming of Methane with Carbon Dioxide and Steam on Nickel-Supported Binary Mg–Al Metal Oxide Catalysts

Catalytic Performance of Ni/SiO2 in Converting Methane to Syngas Using Fluidized Bed Reactor

Tri-reforming of CH 4 over a Thermally Stable and Carbon-Resistant Nanonickel Metal Catalyst Dispersed on Mesoporous-Zirconia

Study of Autothermal Reforming of CH4 with CO2 and O2 to Produce Syngas--comparison of Effect of Fluidized Bed and Fixed Bed Reactor

Methane Autothermal Reforming with CO2 and O2 to Synthesis Gas at the Boundary Between Ni and ZrO2